Changing the programme sequence
Cancelling a programme
You can cancel a programme at any time after it has started:
Press the Start/Stop button.
The following will appear in the display:
Cancel programme | |
|
|
Touch the OK sensor.
The suds will be pumped away. The fol‐ lowing will appear in the display:
Prog. cancelled
Pull open the door.
Remove the laundry.
If you want to select a different pro‐ gramme
Close the door.
Select the programme you want.
Add detergent to the detergent dis‐ penser drawer, if necessary.
Press the Start/Stop button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with the button.
Switch the washing machine back on with the button to continue with the same programme.
Changing a programme
After the start of a programme it is no longer possible to select a different pro‐ gramme.
Temperature
With the exception of the Cottons pro‐ gramme, it is possible to select a differ‐ ent temperature up to 5 minutes after the programme has started.
Press the Temperature button.
Use the , and OK sensors to change the temperature.
Spin speed
It is possible to change the spin speed up until the final spin begins.
Press the Spin speed button.
Use the , and OK sensors to change the spin speed.
Options
It is possible to select or deselect the Short and Water plus options up to 5 minutes after the programme has star‐ ted.
Tip: It is not possible to make any changes to the programme or to cancel it if the safety lock has been activated.
52