AEG 72330 manual Consumption Values and Time Requirements

Page 13

Instructions for use

Consumption Values and Time Requirements

The values for selected programs in the following tables were deter- mined under normal conditions. However, there is a helpful orientation aid for domestic operation.

Program Selector/

Filling Quantity

Water

Energy

Time

Temperature

in kg

in Litres

in kWh

in Minutes

COTTONS/LINEN 95

 

 

 

 

(WITTE/BONTE WAS,

5

49

1,80

138

BLANC/COULEURS)

 

 

 

 

COTTONS/LINEN 601)

5

49

0,94

127

(WITTE/BONTE WAS,

BLANC COULEURS)

 

 

 

 

COTTONS/LINEN 40

 

 

 

 

(WITTE/BONTE WAS,

5

54

0,60

119

BLANC/COULEURS)

 

 

 

 

EASY-CARES 40

 

 

 

 

(KREUKHERSTELLEND, DEFR-

2,5

45

0,50

78

OISSABLE)

 

 

 

 

DELICATES 30

2,5

45

0,25

55

(FIJNE WAS, LINGE DELICAT)

 

 

 

 

WOOLLENS/P (Handwash) 30

2

47

0,25

55

(WOL, LAINE)

 

 

 

 

 

 

 

 

 

1)Note: Program setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the washing powder/liquid used, fluctuations in the mains voltage and selected additional functions.

13

Image 13
Contents ÖKO-LAVAMAT 72330 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyEnvironment Tips DisposalDispose the packing material Dispose the old applianceFront View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Before the First Wash What Does Update Mean?Sort and Prepare the Washing Prepare the Washing CycleWashing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details Brief Instructions Run a Washing CycleSet the Washing Program After the Washing Program EndsIf necessary, change the spin speed for the final Change Spin Speed / Select Rinse HoldAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentCompletion of the Washing Program Start the Washing ProgramChanging a Washing Program Program Sequence DisplayChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitTransporting the Unit Close off the hole with the plug cap G Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Index When do you incur costs even during the warranty period? Service