AEG 72330 manual Setting Up the Unit, Transporting the Unit, Remove the Transport Safeguard

Page 41

Setting up and connection instructions

Setting Up the Unit

3Washing machines with curved panels are not suitable for substruc- tures.

Transporting the Unit

•Do not place the washing machine on its front side or on its right side (looking from the front). Otherwise the electrical components can get wet.

•Never transport the unit without using the transport safeguard. Do not remove the transport safeguard until you reach the installation site. Transporting the unit without the transport safeguard can result in damage to the unit.

•Never lift the unit by the open filling door or by its base.

•When transporting the unit with a sack trolley: Attach the sack trol- ley only at the side.

Remove the Transport Safeguard

Attention! It is essential to remove the transport safeguard before putting the unit into oper- ation! Keep all parts of the trans- port safeguard in a safe place for possible later transport (moving house).

0 1. Open both hose holders on the rear of the unit and remove the hoses and the mains cable.

2.Firmly pull both hose holders off the unit.

41

Image 41

Contents ÖKO-LAVAMAT 72330 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child SafetyEnvironment Tips DisposalDispose the packing material Dispose the old applianceDrawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Before the First Wash What Does Update Mean?Sort and Prepare the Washing Prepare the Washing CycleWashing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener Brief Instructions Run a Washing CycleSet the Washing Program After the Washing Program EndsIf necessary, change the spin speed for the final Change Spin Speed / Select Rinse HoldAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentCompletion of the Washing Program Start the Washing ProgramChanging a Washing Program Program Sequence DisplayChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsTransporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index When do you incur costs even during the warranty period? Service