Instructions for use
Washing Detergents and Care Agents
Which washing detergent and care agent?
Use only washing detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions.
How much washing detergent and care agent?
The amount to be used depends on:
•the dirtiness of the washing
•the hardness category of the mains water supply
•the filling quantity
2If the detergent manufacturer gives no details of the dosing quantities for minimum loads, add one third less for half loads and, in the case of very small loads and for EASY IRON (STRIJKVRIJ, SANS REPASSAGE), only half the amount of detergent recommended for a full load.
Refer to the detergent/care agent manufacturer's instructions on use and dosage.
Water Softener
For medium to high water hardness (hardness category II or higher) you should use water softener. Pay attention to the manufacturer's instruc- tions. Always then meter detergent for hardness category I (= soft). The responsible water works can provide information on the local water hardness.
2Since the water softener is added before the main washing detergent, (water
Water Hardness Details
| Water Hardness °dH | Water Hardness in mmol/l | |
Hardness Category | (degrees German | ||
(millimol per litre) | |||
| hardness) | ||
|
| ||
I – soft | 0 - 7 | up to 1.3 | |
|
|
| |
II – medium hard | 7 - 14 | 1.3 - 2.5 | |
III – hard | 14 - 21 | 2.5 - 3.8 | |
IV – very hard | over 21 | over 3.8 | |
|
|
|
17