AEG 72330 manual Clean the Solution Pump, When all the washing solution has drained off

Page 36

Instructions for use

When all the washing solution has drained off:

6.Firmly push the plug into the emergency emptying hose and turn it tight clockwise.

7.Put the emergency emptying hose back into the holder.

8.Insert the flap into the base panel and close.

Clean the Solution Pump

1Warning! Before cleaning the solution pump, switch off the washing machine and pull out the mains plug!

01. First carry out an emergency emptying (see the above section ”Carry Out Emergency Emptying”).

2.Place a wiping cloth on the floor in front of the cover of the solution pump. Residual water can run out.

3. Unscrew the solution pump cover anti- clockwise and pull it out.

4. Remove any foregin bodies from the pump housing.

5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise.

6. Close the emergency emptying hose and place it in the holder.

7. Close the flap.

36

Image 36

Contents ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material Dispose the old applianceUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Before the First WashPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program EndsChange Spin Speed / Select Rinse Hold If necessary, change the spin speed for the finalOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentStart the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardTransporting the Unit Close off the hole with the plug cap G Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Index Service When do you incur costs even during the warranty period?