AEG 72330 manual Water Drainage into a Siphon, Draining the water into a basin

Page 47

Setting up and connection instructions

Water Drainage

The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub.

Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80cm high). The Customer Service stocks hoses in lengths of 2.7 and 4m.

Attention! It is absolutely essential to install the drainage hose free of pinches.

Water Drainage into a Siphon

The grommet on the end of the hose fits all commonly used siphon types.

0 Secure the grommet/siphon connecting point with a hose clamp.

Draining the water into a basin

Attention!

–Small basins are not suitable for draining the water into them. Water could overflow!

–It is not permitted to submerge the

end of the drainage hose into the pumped-off water. Water could be sucked up into the hose!

–When hooked into a wash-basin or a

bath tub the drainage hose must be protected from slipping out of place by the supplied slip-on elbow. Other- wise the repelling power of the drain- ing water can press the hose out of the sink.

0 Fix the elbow to the water tap or to the wall with string.

47

Image 47

Contents ÖKO-LAVAMAT 72330 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child SafetyDispose the old appliance DisposalEnvironment Tips Dispose the packing materialDrawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Before the First Wash What Does Update Mean?Sort and Prepare the Washing Prepare the Washing CycleWashing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener After the Washing Program Ends Run a Washing CycleBrief Instructions Set the Washing ProgramIf necessary, change the spin speed for the final Change Spin Speed / Select Rinse HoldAdd the Washing Opening and Closing the Filling DoorCompartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for in-wash stain treatmentProgram Sequence Display Start the Washing ProgramCompletion of the Washing Program Changing a Washing ProgramChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsTransporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index When do you incur costs even during the warranty period? Service