AEG 72330 manual What Does Update Mean?, Before the First Wash

Page 14

Instructions for use

What Does ”Update” Mean?

The washing programs of your washing machine are controlled by soft- ware.

New types of textiles or new washing powders/liquids could, in the future, require new washing programs. The software can be adapted to these in most cases.

When new washing programs are available, you can also use them in your washing machine by having the software updated.

For further information on the ”Update”, consult the Customer Service. You can also ask the Customer Service about the costs of an ”Update”.

Before the First Wash

01. Pull out the washing powder drawer slightly.

2.Pour about 1 litre of water through the washing powder drawer into the washing machine. With the next program start, this will close the solution container and the eco-sluice can function correctly.

3.Run the washing cycle without washing (COTTONS/WITTE WAS, BLANC 95 °C, with half the amount of washing detergent). This removes resi- dues left over from production on the drum and solution container.

14

Image 14

Contents ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDispose the packing material DisposalEnvironment Tips Dispose the old applianceDrawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Before the First WashPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener Set the Washing Program Run a Washing CycleBrief Instructions After the Washing Program EndsChange Spin Speed / Select Rinse Hold If necessary, change the spin speed for the finalOpening and Closing the Filling Door Add the WashingCompartment for in-wash stain treatment If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentChanging a Washing Program Start the Washing ProgramCompletion of the Washing Program Program Sequence DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationTransporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index Service When do you incur costs even during the warranty period?