AEG 72330 manual Opening and Closing the Filling Door, Add the Washing

Page 20

Instructions for use

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.

0Close: Press the filling door firmly closed.

The displays DOOR (DEUR/PORTE) and START/ PAUSE (START/PAUZE, MARCHE/PAUSE) show whether the door can be opened while the appliance is switched on:

Display DOOR	Display START/PAUSE	Opening door
(DEUR, PORTE)	(START/PAUZE, MARCHE/PAUSE)	possible?
Glows green	Flashes red	Yes
		Yes, after pressing button
Glows green	Glows red	START/PAUSE (START/
		PAUZE, MARCHE/PAUSE)
Is off	Flashes or glows red	No1)

1) The main door is locked because of a high water level or a high temperature.

3If– the display DOOR (DEUR, PORTE) flashes red

–and the display MAIN WASH (HOOFDWAS, LAVAGE) flashes

you tried to start a washing program without first closing the main door properly. In this case push the door shut firmly and restart the washing program.

Add the Washing

3For the maximum filling quantities, refer to the ”Program Tables”. For information on the correct preparation of the washing, see ”Sort and Prepare the Washing”.

01. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3.Fill with washing.

Attention! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4.Close the filling door securely.

20

Image 20

Contents ÖKO-LAVAMAT 72330 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDisposal Environment TipsDispose the packing material Dispose the old applianceDrawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Before the First WashPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener Run a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program EndsChange Spin Speed / Select Rinse Hold If necessary, change the spin speed for the finalOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for in-wash stain treatment Compartment for pre-wash agent/soaking agentStart the Washing Program Completion of the Washing ProgramChanging a Washing Program Program Sequence DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationTransporting the Unit Setting Up the UnitRemove the Transport Safeguard Close off the hole with the plug cap G Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Index Service When do you incur costs even during the warranty period?