AEG 72330 manual Change Spin Speed / Select Rinse Hold

Page 19

Instructions for use

2.Select any additional programs:

The indicator for the selected additional program lights up.

Press another button to make different selection.

Press the button again to deselect.

VOORWAS PRELAV.

INWEKEN TREMPAGE

KORT

COURT

VLEKKEN TACHES

Change Spin Speed / Select Rinse Hold

0If necessary, change the spin speed for the final

spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.): Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up.

If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is

selected, the washing remains in the last rinsing water and is not spun.

3If you do not change the spin speed, the final spin is automatically adapted depending on the washing program:

– COTTONS/LINEN

1200 revolutions

(WITTE/BONTE WAS, BLANC/COULEURS)

per minute

EASY-CARES/EASY IRON

900 revolutions

(KREUKHERSTELLEND/STRIJKVRIJ,

per minute

DEFROISSABLE/SANS REPASSAGE)

 

– DELICATES

700 revolutions

(FIJNE WAS, LINGE DELICAT)

per minute

– WOOLLENS (WOL, LAINE)/P (Handwash)

900 revolutions

 

per minute

The speed of the intermediate spin depends on the selected program and cannot be changed.

19

Image 19
Contents ÖKO-LAVAMAT 72330 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyDispose the old appliance DisposalEnvironment Tips Dispose the packing materialFront View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Before the First Wash What Does Update Mean?Sort and Prepare the Washing Prepare the Washing CycleWashing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details After the Washing Program Ends Run a Washing CycleBrief Instructions Set the Washing ProgramIf necessary, change the spin speed for the final Change Spin Speed / Select Rinse HoldAdd the Washing Opening and Closing the Filling DoorCompartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for in-wash stain treatmentProgram Sequence Display Start the Washing ProgramCompletion of the Washing Program Changing a Washing ProgramChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsAdjust in accordance with Sans Repassage Rinsing water is Cause is probably a If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitTransporting the Unit Close off the hole with the plug cap G Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Index When do you incur costs even during the warranty period? Service