AEG 86740 manual Cleaning the drain pump, Before cleaning the drain pump

Page 34

Instructions for use

Cleaning the drain pump

	Paper clips, nails and so on can sometimes get into the washing ma-
	chine with the washing and remain in the drain pump casing. Fluff and
	strands of fabric can gather on these items and block the drain pump.
	Therefore the drain pump should be cleaned at least once a year.
1	Warning! Switch off the washing machine and pull out the mains plug
	before cleaning the drain pump!

01. First carry out an emergency emptying (see section ”Carry Out Emer- gency Emptying”).

2.Place a towel on the floor in front of the cover of the solution pump. Residual water can run out.

3. Unscrew the drain pump cover anti- clockwise and pull it out.

4. Remove any foregin bodies from the pump housing.

5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise.

6. Close the emergency emptying hose and place it in the holder.

7. Close the flap.

34

Image 34

Contents ÖKO-LAVAMAT 86740 update Dear customer Contents Remedying Faults What to do ifPage Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General SafetyDispose the packing material DisposalEnvironmental Tips For polyoxymethylene, e.g. plastic clipsFront View Unit DescriptionDrawer for Washing Powder and Care Agent Control Panel Programme knobWool WOL, LAINE/ P Hand wash program Silk ZIJDE, SOIE/ P handwashAdditional programme buttons PRE Wash VOORWAS, PRELAV. Pre wash/SoakingProgrammable functions Two levels for other programmesTemperature Consumption values and time requirementsWater Protection Aqua Control + Aqua Alarm What does Update mean?Wash Time Display Preparing a Wash Load Before the first washSorting and preparing a wash load Types of washing and care symbols How much washing detergent and care agent? Water SoftenerAfter completion of the wash programme Carrying out a wash cycleBrief instructions Open door, remove washingSetting the wash programme Change Spin Speed / Select Rinse Hold Setting the delay timer/soaking time Delay timer Soaking durationOpening and Closing the Filling Door Putting in the washingCompartment for powdered washing agent/Tabs When using liquid washing agent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentFor a set delay time Starting the wash programMulti display Sequence of the programmeProgramme sequence display Changing speed of spinningWash cycle ended/Remove washing Remove washing Turn programme knob to OFF UIT, ArretLights up, too much washing detergent was used Programme tables WashFashion Separate Rinsing/Conditioner/Starching/Impregnation Separate SpinningCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpAfter remedying the fault, press the button Remedying FaultsWhat to do if Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Aid of the emergency unlocking facility When all the washing solution has drained offEmergency Unlocking of the Filling Door Gency unlocking and remove the plug from the mainsWith more water Additional rinse cycle RINCAGE+Set additional rinse cycle Setting water cooling Cancel additional rinse cycleWater cooling Additional rinse cycle and water cooling Cancel water coolingGramme duration increase Variomatic-loose spinning Cancel loose spinSet loose spin Programme security Setting programme securityReleasing the programme security Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationWhen transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the UnitFirmly pull both hose holders off the unit Supplied with the unitSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG