AEG 86740 manual Additional rinse cycle and water cooling, Cancel water cooling

Page 44

Instructions for use

4.if you want to check whether the water cooling is set:

–Turn the programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

–Press the PRE WASH (VOORWAS, PRELAV.) button briefly.

If the MAIN WASH (HOOFDWAS, LAVAGE) blinks on the programme cy- cle display, then the water cooling is set.

Cancel water cooling:

01. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE DELICAT).

2.Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least 5 seconds.

Immediately after the button is pressed, MAIN WASH (HOOFDWAS, LAVAGE) will blink on the programme cycle display. After 5 seconds MAIN WASH (HOOFDWAS, LAVAGE) will stop blinking and will remain lit constantly for 5 seconds.

3.Whilst MAIN WASH (HOOFDWAS, LAVAGE) is constantly lit, release the PRE WASH (VOORWAS, PRELAV.) button. The water cooling is canceled after MAINWASH (HOOFDWAS, LAVAGE) stops blinking,

3	Due to the water cooling the water consumption and and the pro-
	gramme duration increase .

Additional rinse cycle and water cooling

Additional rinse cycle and water cooling can be combined. Setting as for „Additional Rinse Cycle“ and „Water Cooling“.

44

Image 44

Contents ÖKO-LAVAMAT 86740 update Dear customer Contents Remedying Faults What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDisposal Environmental TipsDispose the packing material For polyoxymethylene, e.g. plastic clipsDrawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Programme knobWool WOL, LAINE/ P Hand wash program Silk ZIJDE, SOIE/ P handwashAdditional programme buttons PRE Wash VOORWAS, PRELAV. Pre wash/SoakingProgrammable functions Two levels for other programmesTemperature Consumption values and time requirementsWash Time Display What does Update mean?Water Protection Aqua Control + Aqua Alarm Sorting and preparing a wash load Before the first washPreparing a Wash Load Types of washing and care symbols How much washing detergent and care agent? Water SoftenerCarrying out a wash cycle Brief instructionsAfter completion of the wash programme Open door, remove washingSetting the wash programme Change Spin Speed / Select Rinse Hold Setting the delay timer/soaking time Delay timer Soaking durationOpening and Closing the Filling Door Putting in the washingWhen using liquid washing agent/Tabs Add Washing Detergent/Care AgentCompartment for powdered washing agent/Tabs Compartment for pre-wash agent/soaking agentFor a set delay time Starting the wash programSequence of the programme Programme sequence displayMulti display Changing speed of spinningWash cycle ended/Remove washing Remove washing Turn programme knob to OFF UIT, ArretLights up, too much washing detergent was used Programme tables WashFashion Separate Rinsing/Conditioner/Starching/Impregnation Separate SpinningCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpWhat to do if Remedying FaultsAfter remedying the fault, press the button Been removed Conditioner has not Conditioner insert Rinsed, compartment No negative effect on If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Emergency Unlocking of the Filling DoorAid of the emergency unlocking facility Gency unlocking and remove the plug from the mainsSet additional rinse cycle Additional rinse cycle RINCAGE+With more water Water cooling Cancel additional rinse cycleSetting water cooling Gramme duration increase Cancel water coolingAdditional rinse cycle and water cooling Set loose spin Cancel loose spinVariomatic-loose spinning Releasing the programme security Setting programme securityProgramme security Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Supplied with the unitSetting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Technical Data DimensionsDelivery Heads over 1m Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG