Sharp ESV80HA user manual Operating Your Machine Finishing Programme, Finishing programme

Page 34

CHAPTER 6: OPERATING YOUR MACHINE

FINISHING PROGRAMME

Finishing programme

-Your machine will stop by itself as soon as the programme you have selected finishes.

-Expression of “END” will flash on the electronic display.

Note: Within 2 minutes after the programme has finished, your machine will extinguish the electronic display to save energy. It will re- flash when any auxiliary function button is pressed.

-If you see that the symbol indicating that the door can be opened flashes on the electronic display, you can open the door of your machine and remove the laundry.

-Leave the door of your machine open to allow the inner part of your machine to dry after removing your laundries.

-Switch the programme knob to 0.

-Switch off the power at the mains.

-Turn the tap off.

32

Image 34

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Electrical connection Setting UP Electrical Connection / Water Inlet ConnectionWater inlet connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Selecting programme Operating Your MachineFirst washing operation Auxiliary functionsHalf-load detection system Twinjet systemOperating Your Machine Program Table CottonOperating Your Machine Auxiliary Functions Spin speed selection and auxiliary function of soakingOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Operating Your Machine Starting the Programme Start/Pause buttonOperating Your Machine ADDING/REMOVING Laundry Laundry adding to / removing from the machineOperating Your Machine Child Lock Child lockOperating Your Machine Cancelling Programme Cancelling programmeOperating Your Machine Finishing Programme Finishing programmePage Page Maintenance and Cleaning of Your Machine Water Inlet FiltersMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Body Siphon plugDrum Practical Information Practical Information Troubleshooting Fault Possible Cause Removing MethodsTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Automatic Fault Warnings and What to be Done FaultTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine