Sharp ESV80HA user manual Practical Information

Page 43

CHAPTER -9: PRACTICAL INFORMATION

Blood stain: Submerge your laundries in cold water for 30 minutes. If the stain is not removed, then submerge in a mixture of water and ammoniac (3 spoons of ammoniac in 4 litres of water) for 30 minutes.

Cream, ice cream and milk: Submerge your laundry in cold water and scrub the spotted area with detergent. If the spot is not removed, apply bleacher to the extent suitable for your laundries. (Do not use bleacher for colour laundries.)

Mould: Mould stains should be cleaned as soon as possible. Stain should be washed with detergent water, nevertheless if it cannot be removed, it should be wiped with oxygen water (3%).

Ink: Subject the spotted area to running water and wait until the flow of inked water ends. Then, wipe it with lemon-added water and detergent, and wash it after allowing 5 minutes.

Fruit: Stretch the spotted area of your laundry throughout the opnening of a vessel, and pour cold water on it. Do not pour hot water on the spot. Wipe with cold water and apply glycerine. Allow 1-2 hours, wipe with a few drops of white vinegar, and rinse it.

Grass stain: Wipe the stained part with detergent. If the laundries permit using bleach, wash with bleach. Wipe your woollen laundries with alcohol. (For colour fabrics, a mixture of 1 measure of pure alcohol and 2 measures of water)

Oil paint: Spot should be removed by applying thinner before drying. Then, it should be wiped with detergent and washed.

Burn stain: If your laundry is suitable for applying bleach, you can add bleacher into washing water. For woollen fabrics, a cloth previously submerged in oxygen water should be covered over the stain, and it should be ironed after putting a dry cloth on this cloth. It should be washed after being rinsed properly.

41

Image 43
Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Electrical connection Setting UP Electrical Connection / Water Inlet ConnectionWater inlet connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Auxiliary functions Operating Your MachineFirst washing operation Selecting programmeTwinjet system Half-load detection systemCotton Operating Your Machine Program TableSpin speed selection and auxiliary function of soaking Operating Your Machine Auxiliary FunctionsOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Start/Pause button Operating Your Machine Starting the ProgrammeLaundry adding to / removing from the machine Operating Your Machine ADDING/REMOVING LaundryChild lock Operating Your Machine Child LockCancelling programme Operating Your Machine Cancelling ProgrammeFinishing programme Operating Your Machine Finishing ProgrammePage Page Water Inlet Filters Maintenance and Cleaning of Your MachineMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Body Siphon plugDrum Practical Information Practical Information Fault Possible Cause Removing Methods TroubleshootingTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Fault Automatic Fault Warnings and What to be DoneTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine