Sharp ESV80HA user manual Fault Possible Cause Removing Methods

CHAPTER -10: TROUBLESHOOTING

FAULT	POSSIBLE CAUSE	REMOVING
		METHODS
		Adjust the amount of
	Water being hard.	detergent based on
		the instruction of
	(Dirty, hard, etc.)
Unsatisfactory		detergent
		manufacturer.
washing result.
	Laundries distributed	Spread your laundries
		in the machine
	in your machine non-
		properly and
	homogenously.
		homogeneously.
As soon as the	The end of water	Set the water
machine is loaded	discharging hose is	discharging hose on
with water, water	too low for the	appropriate height.
discharges.	machine.	(**)
No water appears in	No fault. Water in the
the drum during	non-visible part of the	-
washing.	drum.
	Non-dissolving	Perform an extra
		rinsing by setting your
	particles of some
Laundries have		machine to “Rinsing”
	detergents may
		programme, or clean
detergent residues on	adhere to your
		the spots using a
them.	laundries as white
		brush after your
	spots.
		laundries dries.
		Apply the maximum
	The reason for this	amount of detergent
Grey spots appear on		instructed by the
	spots may be oil,	detergent
the laundries.
	cream or ointment.	manufacturer in the
		next washing
		operation.

(**) See the chapter regarding installation of your machine.

45