Sharp ESV80HA user manual

Page 35

CHAPTER -7: ELECTRONIC DISPLAY WARNING SYMBOLS WARNING OF WATER CUT-OFF / LOW MAINS WATER PRESSURE

If symbol flashes on the electronic display:

-Tap may be closed. Check.

-Mains water may be cut-off. Check. If so, switch the programme knob to position 0. You can select a programme and run your machine after the mains water is supplied.

-Mains water pressure may be low. Check.

-Water inlet hose may be twisted. Check.

-Water inlet hose may be clogged. Clean water inlet hose filters. (*)

-Valve inlet filter may be clogged. Clean the valve inlet filters. (*)

(*)See the chapter regarding maintenance and cleaning of your machine.

33

Image 35

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Water inlet connection Setting UP Electrical Connection / Water Inlet ConnectionElectrical connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Auxiliary functions Operating Your MachineFirst washing operation Selecting programmeTwinjet system Half-load detection systemCotton Operating Your Machine Program TableSpin speed selection and auxiliary function of soaking Operating Your Machine Auxiliary FunctionsOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Start/Pause button Operating Your Machine Starting the ProgrammeLaundry adding to / removing from the machine Operating Your Machine ADDING/REMOVING LaundryChild lock Operating Your Machine Child LockCancelling programme Operating Your Machine Cancelling ProgrammeFinishing programme Operating Your Machine Finishing ProgrammePage Page Water Inlet Filters Maintenance and Cleaning of Your MachineMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Drum Siphon plugBody Practical Information Practical Information Fault Possible Cause Removing Methods TroubleshootingTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Fault Automatic Fault Warnings and What to be DoneTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine