Sharp ESV80HA user manual Trouble Code Possible What to do Fault

Page 50

CHAPTER -11: AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE

TROUBLE CODE	POSSIBLE	WHAT TO DO
	FAULT
		- Tap may be closed. Check.
		- Mains water may be cut-off.
		Check.
		- If so, switch the programme
		knob to position 0. You can
		select a programme and run
		your machine after the mains
		water is supplied.
		- Mains water pressure may
		be low. Check.
	Water cut-off	- Water inlet hose may be
	Water cut-off	twisted. Check.
	or low mains	twisted. Check.
	or low mains	- Water inlet hose may be
	water	- Water inlet hose may be
	water	clogged.
	pressure..	clogged.
	pressure..	- Clean water inlet hose
		- Clean water inlet hose
		filters. (*)
		- Valve inlet filter may be
		clogged.
		- Clean the valve inlet filters.
		(*)
		If the problem persists,
		unplug your machine, turn off
		your tap and contact the
		nearest authorised service
		agent.
	Pump is	- Pump filter may be clogged.
	faulty or	Clean the pump filter. (*)
	pump filter is	- Discharging hose may be
	clogged or	clogged or twisted. Check the
	electrical	discharging hose.
	connection	If the problem persists,
	of the pump	contact the nearest
	is faulty.	authorised service agent. (*)
	48

Image 50

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Water inlet connection Setting UP Electrical Connection / Water Inlet ConnectionElectrical connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Selecting programme Operating Your MachineFirst washing operation Auxiliary functionsHalf-load detection system Twinjet systemOperating Your Machine Program Table CottonOperating Your Machine Auxiliary Functions Spin speed selection and auxiliary function of soakingOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Operating Your Machine Starting the Programme Start/Pause buttonOperating Your Machine ADDING/REMOVING Laundry Laundry adding to / removing from the machineOperating Your Machine Child Lock Child lockOperating Your Machine Cancelling Programme Cancelling programmeOperating Your Machine Finishing Programme Finishing programmePage Page Maintenance and Cleaning of Your Machine Water Inlet FiltersMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Drum Siphon plugBody Practical Information Practical Information Troubleshooting Fault Possible Cause Removing MethodsTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Automatic Fault Warnings and What to be Done FaultTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine