Sharp ESV80HA user manual Unbalanced load

Page 48

CHAPTER -10: TROUBLESHOOTING

	FAULT	POSSIBLE CAUSE	REMOVING
	FAULT	POSSIBLE CAUSE	METHODS
			METHODS
			Unbalanced load
			control system will
			try to spread your
			laundries
			homogeneously.
	Wringing operation is	No fault. Unbalanced	Spinning operation
		No fault. Unbalanced	will start after
		load control system	will start after
	not performed or	load control system	spreading your
	not performed or	has been activated.	spreading your
	runs late.	has been activated.	laundries. Put your
	runs late.		laundries. Put your
			laundries in the
			machine
			homogeneously in
			the next washing
			operation.

46

Image 48

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Setting UP Electrical Connection / Water Inlet Connection Electrical connectionWater inlet connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Operating Your Machine First washing operationSelecting programme Auxiliary functionsHalf-load detection system Twinjet systemOperating Your Machine Program Table CottonOperating Your Machine Auxiliary Functions Spin speed selection and auxiliary function of soakingOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Operating Your Machine Starting the Programme Start/Pause buttonOperating Your Machine ADDING/REMOVING Laundry Laundry adding to / removing from the machineOperating Your Machine Child Lock Child lockOperating Your Machine Cancelling Programme Cancelling programmeOperating Your Machine Finishing Programme Finishing programmePage Page Maintenance and Cleaning of Your Machine Water Inlet FiltersMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Siphon plug BodyDrum Practical Information Practical Information Troubleshooting Fault Possible Cause Removing MethodsTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Automatic Fault Warnings and What to be Done FaultTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine