CHAPTER-4: PRELIMINARY PREPARATION FOR WASHING
The amount of detergent you will put in your machine will depend on the following criteria:
Your detergent requirement will be based on the degree of
contamination of your laundries. Do not prewash your less stained laundries and put your slight amount of detergent in the 2nd compartment of the detergent drawer.
For your much stained laundries, select a programme including
prewashing, and put ¼ of the detergent you will put in the detergent drawer in the 1st compartment of the detergent drawer while putting the remaining ¾ of it into 2nd compartment.
Use detergents produced for front loading machines. The amount of detergent you will use for your laundries is printed on the detergent package.
The higher the degree of hardness of the water the more detergent you will use.
The amount of the detergent you will use will increase as the amount of your laundries increase.
Put the softener in the softener compartment in the detergent drawer. Do not exceed the MAX level. Otherwise, softener will flow into washing water through flushing and stain your laundry.
Softeners with high density are required to be thinned to a degree before being put in the drawer. Because
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the accessories bag into 2nd compartment of the detergent drawer and set the amount of liquid detergent according to the levels on this plate. Remember to detach the liquid detergent plate.
14