Sharp ESV80HA user manual Siphon plug, Body, Drum

Page 41

CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR MACHINE / SIPHON PLUG / BODY / DRUM

Siphon plug

Disassemble the detergent drawer. Disassemble the flush stopper and clean the softener residues completely. Refit the flush stopper after cleaning it. Check whether it has settled properly.

Body

Clean the outer body of your machine with warm water and a non- inflammable cleaning agent that will not abrade the body of your machine. After rinsing with some water, dry it using a soft and dry cloth.

Drum

Do not leave metallic objects such as needles, paper clips, coins, etc. in your machine. These objects will lead to formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturers of the cleaning agent. Never use steel wool or similar hard objects for cleaning rust stains.

39

Image 41

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Water inlet connection Setting UP Electrical Connection / Water Inlet ConnectionElectrical connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display First washing operation Operating Your MachineSelecting programme Auxiliary functionsTwinjet system Half-load detection systemCotton Operating Your Machine Program TableSpin speed selection and auxiliary function of soaking Operating Your Machine Auxiliary FunctionsOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Start/Pause button Operating Your Machine Starting the ProgrammeLaundry adding to / removing from the machine Operating Your Machine ADDING/REMOVING LaundryChild lock Operating Your Machine Child LockCancelling programme Operating Your Machine Cancelling ProgrammeFinishing programme Operating Your Machine Finishing ProgrammePage Page Water Inlet Filters Maintenance and Cleaning of Your MachineMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Drum Siphon plugBody Practical Information Practical Information Fault Possible Cause Removing Methods TroubleshootingTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Fault Automatic Fault Warnings and What to be DoneTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine