Sharp ESV80HA user manual Maintenance and Cleaning of Your Machine / Pump Filter

Page 38

CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR MACHINE / PUMP FILTER

A filter system which avoids small items (i.e. coins) from entering into the pump during water discharging is carried out by your machine after completing washing to prolong the lifecycle of your pump. It is recommended that you clean your pump filter once in 2 months. To clean the pump filter:

Depress the lug downwards, to uncover the pump section of the toe board and pull it towards yourself and extract it.

Before opening the filter cover, settle a vessel in front of the filter cover to prevent the water remained in the machine from flowing on the ground.

Loosen the filter cover in counter-clockwise and then empty water.

Clean the foreign materials in the filter.

Check whether the pump rotates with your hands.

36

Image 38

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Water inlet connection Setting UP Electrical Connection / Water Inlet ConnectionElectrical connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Selecting programme Operating Your MachineFirst washing operation Auxiliary functionsHalf-load detection system Twinjet systemOperating Your Machine Program Table CottonOperating Your Machine Auxiliary Functions Spin speed selection and auxiliary function of soakingOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Operating Your Machine Starting the Programme Start/Pause buttonOperating Your Machine ADDING/REMOVING Laundry Laundry adding to / removing from the machineOperating Your Machine Child Lock Child lockOperating Your Machine Cancelling Programme Cancelling programmeOperating Your Machine Finishing Programme Finishing programmePage Page Maintenance and Cleaning of Your Machine Water Inlet FiltersMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Drum Siphon plugBody Practical Information Practical Information Troubleshooting Fault Possible Cause Removing MethodsTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Automatic Fault Warnings and What to be Done FaultTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine