Sharp ESV80HA user manual Troubleshooting, Fault Possible Cause Removing Methods

Page 44

CHAPTER -10: TROUBLESHOOTING

All repairing operations required for your machine should be carried out by authorised service, personnel If your machine requires a repair or if you cannot remove the fault by the help of the information provided as follows:

Unplug your machine.

Turn the tap off.

Contact the nearest authorised service technician.

	FAULT	POSSIBLE CAUSE	REMOVING
	FAULT	POSSIBLE CAUSE	METHODS
			METHODS
		It is not plugged.	Plug it.
		Fuses out of order.	Replace the fuses.
		Electricity cut-off.	Check mains power.
		Start/pause button	Press on start/pause
	Your machine does	not pressed.	button.
	Your machine does		Switch the
	not start.	Programme knob on	Switch the
	not start.	Programme knob on	programme knob to
		position 0.	programme knob to
		position 0.	the desired position.
			the desired position.
		The machine door	Close the machine
		not completely	Close the machine
		not completely	door.
		closed.	door.
		closed.
		Your tap is turned	Turn your faucet on.
		off.	Turn your faucet on.
		off.
		Water inlet hose may	Check water inlet
		be twisted.	hose.
	Your machine does	Water inlet hose	Clean water inlet
	Your machine does	clogged.	hose filters. (*)
	not intake water.	clogged.	hose filters. (*)
	not intake water.	Valve inlet filter	Clean the valve inlet
		Valve inlet filter	Clean the valve inlet
		clogged.	filters. (*)
		The machine door	Close the machine
		not completely	Close the machine
		not completely	door.
		closed.	door.
		closed.

(*)See the chapter regarding maintenance and cleaning of your machine.

42

Image 44

Contents Washing Machine USER’S Manual Page Page Contents Technical Specifications Technical Specifications Before Using Your Washing Machine Safety Warnings Recommendations Setting UP Removing Transport Safety Screws Setting UP Removing Transport Safety Screws Setting UP Adjusting Adjustable Stays Water inlet connection Setting UP Electrical Connection / Water Inlet ConnectionElectrical connection Water discharge connection Preliminary Preparation for Washing Laundry Type Preliminary Preparation for Washing Control Panel Control Panel Detergent Drawer Control Panel Programme Knob Control Panel Electronic Display Operating Your Machine First washing operationSelecting programme Auxiliary functionsHalf-load detection system Twinjet systemOperating Your Machine Program Table CottonOperating Your Machine Auxiliary Functions Spin speed selection and auxiliary function of soakingOperating Your Machine Auxiliary Functions Washing water temperature selection Auxiliary function prewash Auxiliary function for delay timer Anti-Allergic auxiliary function Operating Your Machine Starting the Programme Start/Pause buttonOperating Your Machine ADDING/REMOVING Laundry Laundry adding to / removing from the machineOperating Your Machine Child Lock Child lockOperating Your Machine Cancelling Programme Cancelling programmeOperating Your Machine Finishing Programme Finishing programmePage Page Maintenance and Cleaning of Your Machine Water Inlet FiltersMaintenance and Cleaning of Your Machine / Pump Filter As water in the pump may be hot, wait until it cools down Maintenance and Cleaning of Your Machine / Detergent Drawer Drum Siphon plugBody Practical Information Practical Information Troubleshooting Fault Possible Cause Removing MethodsTroubleshooting Press on Start/Pause Fault Possible Cause Removing Methods Unbalanced load Automatic Fault Warnings and What to be Done FaultTrouble Code Possible What to do Fault Saving Energy and Water Disposal of Your OLD Machine