Beko QWM84 user manual 15 / EN

Page 15

Never move the product without the transportation safety bolts properly fixed in place!

Installation

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Transportation of the product

1. Unplug the product before transporting it.

2. Remove water drain and water supply connections.

3. Drain all water that has remained in the product. See 7.5

4. Install transportation safety bolts in the reverse order of removal procedure; see 3.3.

A warning: Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

Washing Machine /User’s Manual	15 / EN

Image 15

Contents Washing Machine Important information or useful hints about usage Dear Customer Explanation of symbolsTroubleshooting Important instructions for safety Environment4Installation Maintenance and cleaningGeneral safety Important instructions for safety and environmentIntended use Important instructions for safety and environmentChildrens safety Package informationDisposing of the waste product Compliance with RoHS Directive Compliance with Weee DirectiveTop panel Loading door Control panel Power cableYour washing machine OverviewYour washing machine Package Contents Your washing machine Technical specifications Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcement Installation Connecting water supply Connecting to the drain 13 / EN Adjusting the feetFitting a different plug Electrical connectionTighten all lock nuts again by hand Electricity supply15 / EN Preparation Sorting the laundry16 / EN Preparation Preparing laundry for washing Things to be done for energy saving17 / EN Preparation Initial use Correct load capacityLoading the laundry 19 / EN Preparation Using detergent and softenerDetergent Drawer Detergent drawer compartments are indicated belowBleaches Wipe the inside of the drum after using starchPreparation Liquid Softener Compartment21 / EN Preparation Tips for efficient washingControl panel Display symbolsSpin Speed Adjustment button On / Off button Display Operating the productOperating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes 25 / EN Temperature selectionOperating the product Special programmes Spin speed selection26 / EN Operating the product Programme and consumption table27 / EN Operating the product28 / EN Operating the product Auxiliary function selectionPrewash Extra RinseTime display Changing the selections after programme has started Operating the product Starting the programmeProgress of programme Loading door lockCancelling the programme Machine is in Rinse Hold modeChild Lock Your machine is equipped with a Standby Mode Operating the product End of programme32 / EN 33 / EN Quick User GuideMonths Cleaning the detergent drawerCleaning the loading door and the drum Has come to an endDraining remaining water and cleaning the pump filter Maintenance and cleaningCleaning the water intake filters Cleaning the body and control panelInstall the filter Place a large container at the end of the hose36 / EN Machine does not fill with water Troubleshooting37 / EN Programme cannot be started or selected38 / EN TroubleshootingIt does not rinse well 39 / ENFoam is overflowing from the detergent drawer 40 / ENDetergent residue in the detergent drawer Water pressure is low. Check the water pressureMachine does not start. Nothing appears on the display On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door 41 / EN42 / EN Complying Commission Delegated Regulation EU No 1061/20143 / EN BUILT-IN Installation44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Washing Machines ServiceGuarantee