Beko QWM84 user manual Quick User Guide, 33 / EN

Page 33

6Quick User Guide

6.1 Preparing the machine

1.Make sure that the hoses are connected tightly.

2.Plug in your machine.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

6.2 Programme selection

Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the "Programme and consumption table" and the temperature table below.

6.3 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel.

6.4 Starting the programme

1.Press Start / Pause / Cancel button to start the programme.

2.Start symbol showing the startup of the programme will turn on.

3.Loading door is locked and Door Locked symbol appears on the display.

4.The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin).

6.5 End of programme

“End” appears on the display at the end of the programme. Symbols of the programme steps remain lit. Auxiliary function, spin speed and temperature that were selected at the beginning of the programme remain selected.

6.6 Cancelling the programme

Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. “End” appears on the display and the programme is cancelled.

6.7 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

C You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.

To activate the Child Lock:

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “Con” appears on the display.

C Same phrase will appear on the display if you press any button when Child Lock is enabled.

To deactivate the Child Lock:

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “COFF” appears on the display.

C Do not forget to disable the child lock at the end of the programme if it was enabled before. Otherwise, machine will not allow to select a new programme.

Washing Machine /User’s Manual

33 / EN

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Washing Machine Important information or useful hints about usage Dear Customer Explanation of symbolsInstallation Important instructions for safety Environment4Maintenance and cleaning TroubleshootingGeneral safety Important instructions for safety and environmentIntended use Important instructions for safety and environmentChildrens safety Package informationDisposing of the waste product Compliance with RoHS Directive Compliance with Weee DirectiveYour washing machine Power cableOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Appropriate installation location InstallationRemoving packaging reinforcement Removing the transportation locksInstallation Connecting water supplyConnecting to the drain 13 / EN Adjusting the feetTighten all lock nuts again by hand Electrical connectionElectricity supply Fitting a different plug15 / EN Preparation Sorting the laundry16 / EN Preparation Preparing laundry for washing Things to be done for energy saving17 / EN Preparation Initial use Correct load capacityLoading the laundry Detergent Drawer Preparation Using detergent and softenerDetergent drawer compartments are indicated below 19 / ENPreparation Wipe the inside of the drum after using starchLiquid Softener Compartment Bleaches21 / EN Preparation Tips for efficient washingSpin Speed Adjustment button On / Off button Display Display symbolsOperating the product Control panelOperating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes Operating the product Special programmes Temperature selectionSpin speed selection 25 / EN26 / EN Operating the product Programme and consumption table27 / EN Operating the productPrewash Operating the product Auxiliary function selectionExtra Rinse 28 / ENTime display Progress of programme Operating the product Starting the programmeLoading door lock Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock Your machine is equipped with a Standby Mode Operating the product End of programme32 / EN 33 / EN Quick User GuideCleaning the loading door and the drum Cleaning the detergent drawerHas come to an end MonthsCleaning the water intake filters Maintenance and cleaningCleaning the body and control panel Draining remaining water and cleaning the pump filterInstall the filter Place a large container at the end of the hose36 / EN 37 / EN TroubleshootingProgramme cannot be started or selected Machine does not fill with water38 / EN TroubleshootingIt does not rinse well 39 / ENDetergent residue in the detergent drawer 40 / ENWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerLoading door may be open. Close the loading door On / Off button might not be pressed. Press On / Off button41 / EN Machine does not start. Nothing appears on the display42 / EN Complying Commission Delegated Regulation EU No 1061/20143 / EN BUILT-IN Installation44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Washing Machines ServiceGuarantee
Top Page Image Contents