Beko QWM84 user manual Intended use, Important instructions for safety and environment

Page 5

Important instructions for safety and environment

•Use detergents, softeners and supplements suitable for automatic washing machines only.

•Follow the instructions on the textile tags and on the detergent package.

•The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

•Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similary qualified persons in order to avoid a hazard.

•If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

•Place the product on a rigid, flat and level surface.

•Do not place it on a long-pile rug or similar surfaces.

•Do not place the product on a high platform or near the edge on a cascaded surface.

•Do not place the product on the power cable.

•Never use sponge or scrub materials. These will damage the painted, chrome plated and plastic surfaces.

1.2 Intended use

•This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

•The product must only be used for washing and rinsing of laundry that are marked accordingly.

•The manufacturer waives any responsibility arisen from incorrect usage or transportation.

•The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.

Washing Machine /User’s Manual	5 / EN

Image 5

Contents Washing Machine Important information or useful hints about usage Dear Customer Explanation of symbolsInstallation Important instructions for safety Environment4Maintenance and cleaning TroubleshootingGeneral safety Important instructions for safety and environmentIntended use Important instructions for safety and environmentDisposing of the waste product Childrens safetyPackage information Compliance with RoHS Directive Compliance with Weee DirectiveYour washing machine Power cableOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Appropriate installation location InstallationRemoving packaging reinforcement Removing the transportation locksConnecting to the drain InstallationConnecting water supply 13 / EN Adjusting the feetTighten all lock nuts again by hand Electrical connectionElectricity supply Fitting a different plug15 / EN 16 / EN PreparationSorting the laundry 17 / EN Preparation Preparing laundry for washingThings to be done for energy saving Loading the laundry Preparation Initial useCorrect load capacity Detergent Drawer Preparation Using detergent and softenerDetergent drawer compartments are indicated below 19 / ENPreparation Wipe the inside of the drum after using starchLiquid Softener Compartment Bleaches21 / EN Preparation Tips for efficient washingSpin Speed Adjustment button On / Off button Display Display symbolsOperating the product Control panelMain programmes Operating the product Preparing the machineProgramme selection Operating the product Additional programmes Operating the product Special programmes Temperature selectionSpin speed selection 25 / EN26 / EN Operating the product Programme and consumption table27 / EN Operating the productPrewash Operating the product Auxiliary function selectionExtra Rinse 28 / ENTime display Progress of programme Operating the product Starting the programmeLoading door lock Changing the selections after programme has startedChild Lock Cancelling the programmeMachine is in Rinse Hold mode 32 / EN Your machine is equipped with a Standby ModeOperating the product End of programme 33 / EN Quick User GuideCleaning the loading door and the drum Cleaning the detergent drawerHas come to an end MonthsCleaning the water intake filters Maintenance and cleaningCleaning the body and control panel Draining remaining water and cleaning the pump filter36 / EN Install the filterPlace a large container at the end of the hose 37 / EN TroubleshootingProgramme cannot be started or selected Machine does not fill with water38 / EN TroubleshootingIt does not rinse well 39 / ENDetergent residue in the detergent drawer 40 / ENWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerLoading door may be open. Close the loading door On / Off button might not be pressed. Press On / Off button41 / EN Machine does not start. Nothing appears on the display42 / EN Complying Commission Delegated Regulation EU No 1061/20143 / EN BUILT-IN Installation44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Washing Machines ServiceGuarantee