Beko QWM84 Operating the product Starting the programme, Progress of programme, Loading door lock

Page 30

Operating the product

5.13 Starting the programme

1.Press Start / Pause / Cancel button to start the programme.

2.Start symbol showing the startup of the programme will turn on.

3.Loading door is locked and Door Locked symbol appears on the display.

4.The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin).

5.14 Progress of programme

Progress of a running programme is indicated on the display with a set of symbols.

Relevant symbol appears on the display at the beginning of each programme step and all symbols remain lit at the end of the programme. The farthermost right symbol indicates the current programme step.

Prewash

If the Prewash auxiliary function is selected, Prewash symbol appears on the display indicating that the prewash step has started.

Main Wash

Main Wash symbol indicating that the main wash step has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has started appears on the display.

Softener

Softener symbol indicating that the softener step has started appears on the display.

Spin

Appears at the beginning of the final spin step and remains lit during Spin and Pump special programmes.

C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

5.15 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.

Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door becomes ready to open when programme completes or the machine is paused. Do not force to open the loading door in this step. Symbol disappears when the door is ready to open. You can open the door when the symbol

disappears.

5.16Changing the selections after programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to switch the machine to pause mode. Pause symbol appears on the display indicating that the machine is paused. Start symbol disappears.

F1

F2

F3

F4

Changing the speed and temperature settings for auxiliary functions

Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".

Adding or taking out laundry

1.Press the Start / Pause / Cancel button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.

2.Wait until the Loading Door can be opened.

3.Open the Loading Door and add or take out the laundry.

4.Close the Loading Door.

30 / EN

Washing Machine /User’s Manual

 

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Washing Machine Dear Customer Explanation of symbols Important information or useful hints about usageMaintenance and cleaning Important instructions for safety Environment4Installation TroubleshootingImportant instructions for safety and environment General safetyImportant instructions for safety and environment Intended useChildrens safety Package informationDisposing of the waste product Compliance with Weee Directive Compliance with RoHS DirectiveOverview Power cableYour washing machine Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksInstallation Connecting water supplyConnecting to the drain Adjusting the feet 13 / ENElectricity supply Electrical connectionTighten all lock nuts again by hand Fitting a different plug15 / EN Preparation Sorting the laundry16 / EN Preparation Preparing laundry for washing Things to be done for energy saving17 / EN Preparation Initial use Correct load capacityLoading the laundry Detergent drawer compartments are indicated below Preparation Using detergent and softenerDetergent Drawer 19 / ENLiquid Softener Compartment Wipe the inside of the drum after using starchPreparation BleachesPreparation Tips for efficient washing 21 / ENOperating the product Display symbolsSpin Speed Adjustment button On / Off button Display Control panelOperating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes Spin speed selection Temperature selectionOperating the product Special programmes 25 / ENOperating the product Programme and consumption table 26 / ENOperating the product 27 / ENExtra Rinse Operating the product Auxiliary function selectionPrewash 28 / ENTime display Loading door lock Operating the product Starting the programmeProgress of programme Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock Your machine is equipped with a Standby Mode Operating the product End of programme32 / EN Quick User Guide 33 / ENHas come to an end Cleaning the detergent drawerCleaning the loading door and the drum MonthsCleaning the body and control panel Maintenance and cleaningCleaning the water intake filters Draining remaining water and cleaning the pump filterInstall the filter Place a large container at the end of the hose36 / EN Programme cannot be started or selected Troubleshooting37 / EN Machine does not fill with waterTroubleshooting 38 / EN39 / EN It does not rinse wellWater pressure is low. Check the water pressure 40 / ENDetergent residue in the detergent drawer Foam is overflowing from the detergent drawer41 / EN On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 42 / ENBUILT-IN Installation 43 / EN44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Service Washing MachinesGuarantee
Top Page Image Contents