Beko QWM84 Operating the product Special programmes, Temperature selection, Spin speed selection

Page 25

Operating the product

5.7 Special programmes

For specific applications, select any of the following programmes.

• Rinse

Use this programme when you want to rinse or starch separately.

• Spin+Drain

Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.

Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them.

If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause / Cancel button.

C Use a lower spin speed for delicate laundries.

5.8 Temperature selection

Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the Temperature Adjustment button. Temperature decreases with increments of 10° and finally, “-” symbol indicating the cold wash option appears on the display.

C If you scroll to cold wash option and press Temperature Adjustment button again, the recommended temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.

Economy symbol

Indicates the programmes and temperatures that provide energy savings.

C Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene. Similarly, Economy symbol can not be selected in Baby, Refresh, Drum Cleaning, Spin and Rinse programmes as well.

5.9 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.

To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options.

C Rinse Hold option is indicated with “ ” symbol and No Spin option is indicated with “ ” symbol.

F1

F2

F3

F4

Washing Machine /User’s Manual	25 / EN

Image 25

Contents Washing Machine Important information or useful hints about usage Dear Customer Explanation of symbolsInstallation Important instructions for safety Environment4Maintenance and cleaning TroubleshootingGeneral safety Important instructions for safety and environmentIntended use Important instructions for safety and environmentPackage information Childrens safetyDisposing of the waste product Compliance with RoHS Directive Compliance with Weee DirectiveYour washing machine Power cableOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Appropriate installation location InstallationRemoving packaging reinforcement Removing the transportation locksConnecting water supply InstallationConnecting to the drain 13 / EN Adjusting the feetTighten all lock nuts again by hand Electrical connectionElectricity supply Fitting a different plug15 / EN Sorting the laundry Preparation16 / EN Things to be done for energy saving Preparation Preparing laundry for washing17 / EN Correct load capacity Preparation Initial useLoading the laundry Detergent Drawer Preparation Using detergent and softenerDetergent drawer compartments are indicated below 19 / ENPreparation Wipe the inside of the drum after using starchLiquid Softener Compartment Bleaches21 / EN Preparation Tips for efficient washingSpin Speed Adjustment button On / Off button Display Display symbolsOperating the product Control panelProgramme selection Operating the product Preparing the machineMain programmes Operating the product Additional programmes Operating the product Special programmes Temperature selectionSpin speed selection 25 / EN26 / EN Operating the product Programme and consumption table27 / EN Operating the productPrewash Operating the product Auxiliary function selectionExtra Rinse 28 / ENTime display Progress of programme Operating the product Starting the programmeLoading door lock Changing the selections after programme has startedMachine is in Rinse Hold mode Cancelling the programmeChild Lock Operating the product End of programme Your machine is equipped with a Standby Mode32 / EN 33 / EN Quick User GuideCleaning the loading door and the drum Cleaning the detergent drawerHas come to an end MonthsCleaning the water intake filters Maintenance and cleaningCleaning the body and control panel Draining remaining water and cleaning the pump filterPlace a large container at the end of the hose Install the filter36 / EN 37 / EN TroubleshootingProgramme cannot be started or selected Machine does not fill with water38 / EN TroubleshootingIt does not rinse well 39 / ENDetergent residue in the detergent drawer 40 / ENWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerLoading door may be open. Close the loading door On / Off button might not be pressed. Press On / Off button41 / EN Machine does not start. Nothing appears on the display42 / EN Complying Commission Delegated Regulation EU No 1061/20143 / EN BUILT-IN Installation44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Washing Machines ServiceGuarantee