Beko QWM84 user manual 39 / EN, It does not rinse well

Page 39

Troubleshooting

Washing performance is poor: Stains persist or the laundry is not whitened.(**)

•Insufficient amount of detergent is used. >>> Use recommended amount of detergent appropriate for the laundry.

•Excessive laundry was loaded in. >>> Do not load the machine in excess. Load with amounts recommended in the "Programme and consumption table".

•Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.

•Wrong type of detergent is used. >>> Use original detergent appropriate for the machine.

•Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.

Washing performance is poor: Oily stains appeared on the laundry.

•Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2. Washing performance is poor: Clothes smell unpleasantly.(**)

•Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/ or in short programmes. >>> Leave the detergent drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.

Colour of the clothes faded.(**)

•Excessive laundry was loaded in. >>> Do not load the machine in excess.

•Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

•A higher temperature is selected. >>> Select the proper programme and temperature according to the type and soiling degree of the laundry.

It does not rinse well.

•The amount, brand and storage conditions of the detergent used are inappropriate. >>> Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

•Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.

•Pump filter is clogged. >>> Check the filter.

•Drain hose is folded. >>> Check the drain hose.

Laundry became stiff after washing.(**)

•Insufficient amount of detergent is used. >>> Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.

•Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.

•Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the dispenser with hot water.

Laundry does not smell like the softener.(**)

•Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment.

•Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the dispenser with hot water.

Washing Machine /User’s Manual

39 / EN

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Washing Machine Important information or useful hints about usage Dear Customer Explanation of symbolsTroubleshooting Important instructions for safety Environment4Installation Maintenance and cleaningGeneral safety Important instructions for safety and environmentIntended use Important instructions for safety and environmentChildrens safety Package informationDisposing of the waste product Compliance with RoHS Directive Compliance with Weee DirectiveTop panel Loading door Control panel Power cableYour washing machine OverviewYour washing machine Package Contents Your washing machine Technical specifications Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcementInstallation Connecting water supplyConnecting to the drain 13 / EN Adjusting the feetFitting a different plug Electrical connectionTighten all lock nuts again by hand Electricity supply15 / EN Preparation Sorting the laundry16 / EN Preparation Preparing laundry for washing Things to be done for energy saving17 / EN Preparation Initial use Correct load capacityLoading the laundry 19 / EN Preparation Using detergent and softenerDetergent Drawer Detergent drawer compartments are indicated belowBleaches Wipe the inside of the drum after using starchPreparation Liquid Softener Compartment21 / EN Preparation Tips for efficient washingControl panel Display symbolsSpin Speed Adjustment button On / Off button Display Operating the productOperating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes 25 / EN Temperature selectionOperating the product Special programmes Spin speed selection26 / EN Operating the product Programme and consumption table27 / EN Operating the product28 / EN Operating the product Auxiliary function selectionPrewash Extra RinseTime display Changing the selections after programme has started Operating the product Starting the programmeProgress of programme Loading door lockCancelling the programme Machine is in Rinse Hold modeChild Lock Your machine is equipped with a Standby Mode Operating the product End of programme32 / EN 33 / EN Quick User GuideMonths Cleaning the detergent drawerCleaning the loading door and the drum Has come to an endDraining remaining water and cleaning the pump filter Maintenance and cleaningCleaning the water intake filters Cleaning the body and control panelInstall the filter Place a large container at the end of the hose36 / EN Machine does not fill with water Troubleshooting37 / EN Programme cannot be started or selected38 / EN TroubleshootingIt does not rinse well 39 / ENFoam is overflowing from the detergent drawer 40 / ENDetergent residue in the detergent drawer Water pressure is low. Check the water pressureMachine does not start. Nothing appears on the display On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door 41 / EN42 / EN Complying Commission Delegated Regulation EU No 1061/20143 / EN BUILT-IN Installation44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Washing Machines ServiceGuarantee
Top Page Image Contents