Beko QWM84 user manual Preparation Initial use, Correct load capacity, Loading the laundry

Page 18

The loading door is locked while a programme is running. The door can only be opened a while after the programme comes to an end.

warning: In case of misplacing the laundry, noise and vibration problems may occur in the machine.

Washing Machine /User’s Manual

Preparation

4.4 Initial use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”.

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your product is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods described under “7.2 Cleaning the loading door and the drum” section of the user manual.

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product.

4.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.

The machine automatically adjusts the amount of water according to the weight of the loaded laundry.


A	warning: Follow the information in the
	“Programme and consumption table”.
	When overloaded, machine's washing
	performance will drop. Moreover, noise
	and vibration problems may occur.

Laundry type		Weight (g)
Bathrobe		1200
Napkin		100
Duvet cover		700
Bed Sheet		500
Pillowcase		200
Tablecloth		250
Towel		200
Hand towel		100
Evening gown		200
Underclothing		100
Men’s overalls		600
Men’s shirt		200
Men’s pajamas		500
Blouses		100

4.6 Loading the laundry

1. Open the loading door.

2. Place laundry items loosely into the machine.

3. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.

C

A

18 / EN

Image 18

Contents Washing Machine Dear Customer Explanation of symbols Important information or useful hints about usageMaintenance and cleaning Important instructions for safety Environment4Installation TroubleshootingImportant instructions for safety and environment General safetyImportant instructions for safety and environment Intended useChildrens safety Package informationDisposing of the waste product Compliance with Weee Directive Compliance with RoHS DirectiveOverview Power cableYour washing machine Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksInstallation Connecting water supplyConnecting to the drain Adjusting the feet 13 / ENElectricity supply Electrical connectionTighten all lock nuts again by hand Fitting a different plug15 / EN Preparation Sorting the laundry16 / EN Preparation Preparing laundry for washing Things to be done for energy saving17 / EN Preparation Initial use Correct load capacityLoading the laundry Detergent drawer compartments are indicated below Preparation Using detergent and softenerDetergent Drawer 19 / ENLiquid Softener Compartment Wipe the inside of the drum after using starchPreparation BleachesPreparation Tips for efficient washing 21 / ENOperating the product Display symbolsSpin Speed Adjustment button On / Off button Display Control panelOperating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes Spin speed selection Temperature selectionOperating the product Special programmes 25 / ENOperating the product Programme and consumption table 26 / ENOperating the product 27 / ENExtra Rinse Operating the product Auxiliary function selectionPrewash 28 / ENTime display Loading door lock Operating the product Starting the programmeProgress of programme Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock Your machine is equipped with a Standby Mode Operating the product End of programme32 / EN Quick User Guide 33 / ENHas come to an end Cleaning the detergent drawerCleaning the loading door and the drum MonthsCleaning the body and control panel Maintenance and cleaningCleaning the water intake filters Draining remaining water and cleaning the pump filterInstall the filter Place a large container at the end of the hose36 / EN Programme cannot be started or selected Troubleshooting37 / EN Machine does not fill with waterTroubleshooting 38 / EN39 / EN It does not rinse wellWater pressure is low. Check the water pressure 40 / ENDetergent residue in the detergent drawer Foam is overflowing from the detergent drawer41 / EN On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 42 / ENBUILT-IN Installation 43 / EN44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Service Washing MachinesGuarantee