Beko QWM84 Cleaning the detergent drawer, Cleaning the loading door and the drum, Months

Page 34
If more than a normal amount of softener and liquid detergent mixture starts to remain in the softener compartment, the siphon must be cleaned.

7Maintenance and cleaning

Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.

7.1 Cleaning the detergent drawer

Remove any powder residue buildup in the drawer. To do this;

2

protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning.

3.Replace the drawer into its housing after cleaning. Check if the siphon is in its original location.

7.2Cleaning the loading door and the drum

Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not featured with Drum

1

3 4

Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Run theBefore starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. 2). If the anti- limescale is in tablet form, put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme

1. You can remove the detergent drawer by pulling it towards yourself strongly.

C

2.Wash the drawer and the siphon with plenty of lukewarm water in a washbasin. Wear

has come to an end.

C

Repeat Drum Cleaning process in every

2 months.

C Use an anti-limescale suitable for the washing machines.

After every washing make sure that no foreign substance is left in the drum.

34 / EN

Washing Machine /User’s Manual

 

 

Image 34
Contents Washing Machine Dear Customer Explanation of symbols Important information or useful hints about usageMaintenance and cleaning Important instructions for safety Environment4Installation TroubleshootingImportant instructions for safety and environment General safetyImportant instructions for safety and environment Intended usePackage information Childrens safetyDisposing of the waste product Compliance with Weee Directive Compliance with RoHS DirectiveOverview Power cableYour washing machine Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Removing packaging reinforcement InstallationAppropriate installation location Removing the transportation locksConnecting water supply InstallationConnecting to the drain Adjusting the feet 13 / ENElectricity supply Electrical connectionTighten all lock nuts again by hand Fitting a different plug15 / EN Sorting the laundry Preparation16 / EN Things to be done for energy saving Preparation Preparing laundry for washing17 / EN Correct load capacity Preparation Initial useLoading the laundry Detergent drawer compartments are indicated below Preparation Using detergent and softenerDetergent Drawer 19 / ENLiquid Softener Compartment Wipe the inside of the drum after using starchPreparation BleachesPreparation Tips for efficient washing 21 / ENOperating the product Display symbolsSpin Speed Adjustment button On / Off button Display Control panelProgramme selection Operating the product Preparing the machineMain programmes Operating the product Additional programmes Spin speed selection Temperature selectionOperating the product Special programmes 25 / ENOperating the product Programme and consumption table 26 / ENOperating the product 27 / ENExtra Rinse Operating the product Auxiliary function selectionPrewash 28 / ENTime display Loading door lock Operating the product Starting the programmeProgress of programme Changing the selections after programme has startedMachine is in Rinse Hold mode Cancelling the programmeChild Lock Operating the product End of programme Your machine is equipped with a Standby Mode32 / EN Quick User Guide 33 / ENHas come to an end Cleaning the detergent drawerCleaning the loading door and the drum MonthsCleaning the body and control panel Maintenance and cleaningCleaning the water intake filters Draining remaining water and cleaning the pump filterPlace a large container at the end of the hose Install the filter36 / EN Programme cannot be started or selected Troubleshooting37 / EN Machine does not fill with waterTroubleshooting 38 / EN39 / EN It does not rinse wellWater pressure is low. Check the water pressure 40 / ENDetergent residue in the detergent drawer Foam is overflowing from the detergent drawer41 / EN On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 42 / ENBUILT-IN Installation 43 / EN44 / EN 45 / EN 46 / EN 47 / EN 48 / EN 49 / EN 50 / EN 51 / EN 52 / EN 53 / EN 54 / EN Service Washing MachinesGuarantee