Progress of programme, Loading door lock

display. The Child Lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.

C Even if another programme is selected with the Programme Selection knob while the Child Lock is active, previously selected programme will continue running.

To activate the Child Lock:

Press and hold 1st and 2nd Auxiliary Function buttons for 3 seconds. The lights on the 1st and 2nd Auxiliary Function buttons will flash, and "C03", "C02", "C01" will appear on the display respectively while you keep the buttons pressed for 3 seconds. Then, "Con" will appear on the display indicating that the Child Lock is activated. If you press any button or turn the Programme Selection knob when the Child Lock is active, same phrase will appear on the display. The lights on the 1st and 2nd auxiliary function buttons that are used to deactivate the Child Lock will blink 3 times.

To deactivate the Child Lock:

Press and hold 1st and 2nd auxiliary function buttons for 3 seconds while any programme is running. The lights on the 1st and 2nd Auxiliary Function buttons will flash, and "C03", "C02", "C01" will appear on the display respectively while you keep the buttons pressed for 3 seconds. Then, "COFF" will appear on the display indicating that the Child Lock is deactivated.

C	In addition to the method above, to deactivate
	the Child Lock, switch the Programme Selection
	knob to On / Off position when no programme is
	running, and select another programme.
C	Child Lock is not deactivated after power failures
	or when the machine is unplugged.
C	If you switch off the machine by pressing the On
	/ Off button when the Child Lock is active and
	the machine is running, then the child lock will
	be deactivated.

Progress of programme

Progress of a running programme can be followed from the Programme Follow-up indicator. At the beginning of every programme step, the relevant indicator light will turn on and light of the completed step will turn off.

You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be in a step after the running programme step. If the change is not compatible, relevant lights will flash for 3 times.

C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.

Loading door light will start flashing when the machine is switched to Pause mode. Machine

checks the level of the water inside. If the level is suitable, Loading Door light illuminates steadily within 1-2 minutes and the loading door can be opened.

If the level is unsuitable, Loading Door light turns off and the loading door cannot be opened. If you are obliged to open the Loading Door while the Loading Door light is off, you have to cancel the current programme; see "Canceling the programme".

Changing the selections after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to pause mode while a programme is running.

The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to show that the machine has been switched to the pause mode.

Also, when the loading door is ready to be opened, Loading Door light will also illuminate continuously in addition to the programme step light.

Changing the speed and temperature settings for auxiliary functions

Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection".

You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".

C If no change is allowed, the relevant light will flash for 3 times.

Adding or taking out laundry

Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. Wait until the Loading Door can be opened. Open the Loading Door and add or take out the laundry. Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if necessary. Press Start / Pause button to start the machine.

C The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.

Canceling the programme

To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be canceled. End / Cancel light will flash continuously to notify that the programme has been canceled.

Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water in the machine or not. After this period, your machine will be ready to start with the first step of the new programme.

C Depending on the step where the programme was canceled in, you may have to put detergent and softener again for the programme you have selected anew.

C If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme

WNF 7301 WE20, WNF 7341 AE20, WNF 7321 AE20, WNF 7361 AE20 specifications

Blomberg, a brand renowned for its innovative and energy-efficient home appliances, offers several advanced washing machines, including models WNF 7361 AE20, WNF 7321 AE20, WNF 7341 AE20, and WNF 7301 WE20. Each of these models boasts a range of features designed to enhance the laundry experience and ensure optimal cleaning results.

The WNF 7361 AE20 stands out with its impressive 8 kg load capacity, making it ideal for larger households. It incorporates Blomberg's ProSmart Inverter Motor, known for its quiet operation and energy efficiency. This model features a variety of wash programs, including a quick-wash setting that allows users to clean lightly soiled garments in just 14 minutes. Additionally, the machine's Hygiene+ program is designed to eliminate bacteria and allergens, providing peace of mind for sensitive skin.

Next, the WNF 7321 AE20 offers a slightly more compact 7 kg load capacity, making it a perfect fit for smaller spaces without sacrificing performance. This model also features the ProSmart Inverter Motor, ensuring low energy consumption as well as reduced noise levels. Users will appreciate the DrumClean program, which keeps the washing drum hygienic and odor-free, and the Delay Start option, providing flexibility in scheduling washes at their convenience.

The WNF 7341 AE20 introduces a 9 kg capacity, catering to families with larger laundry demands. Similar to the other models, it includes the ProSmart Inverter Motor for efficient and quiet operations. The EcoGentle function ensures that even delicate fabrics receive gentle care while being cleaned efficiently. This model also features a user-friendly LCD display, making it easy to choose the desired settings and programs.

Lastly, the WNF 7301 WE20 is a versatile model with a load capacity of 7 kg. It combines efficiency with a sleek design, offering multiple washing programs that cater to various fabric types. The AutoDry feature is particularly beneficial, automatically stopping the drying process once the desired moisture level is achieved, preventing fabric damage and energy waste.

All these models are equipped with a robust set of features that reflect Blomberg's commitment to quality, efficiency, and environmental responsibility. With state-of-the-art technologies, including energy-efficient motors and specialized wash programs, they provide unrivaled convenience and performance in laundry care. Each model embodies a blend of functionality and modern design, making them excellent choices for any home.