Important safety instructions | Blomberg WNF 7301 WE20 specification

1 Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

•This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

•Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat.

This will cause problems with your product.

•Do not operate the product if the power cable

/ plug is damaged. Call the Authorized Service Agent.

•Have a qualified electrician connect a

16-Ampere fuse to the installation location of the product.

•If the product has a failure, it should not be operated unless it is repaired by the Authorized

Service Agent. There is the risk of electric shock!

•This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

•Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•The water supply and draining hoses must be securely fastened and remain undamaged.

Otherwise, there is the risk of water leakage.

•Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

•Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

•Unplug the product when not in use.

•Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

•Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

•Use detergents, softeners and supplements suitable for automatic washing machines only.

•Follow the instructions on the textile tags and on the detergent package.

•The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

•Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

Intended use

•This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

•The product must only be used for washing and rinsing of laundry that are marked accordingly.

•The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Children's safety

•Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.

•Do not forget to close the loading door when leaving the room where the product is located.

•Store all detergents and additives in a safe place away from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

C Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

B Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

C Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

Appropriate installation location

•Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.

•Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

WNF 7301 WE20, WNF 7341 AE20, WNF 7321 AE20, WNF 7361 AE20 specifications

Blomberg, a brand renowned for its innovative and energy-efficient home appliances, offers several advanced washing machines, including models WNF 7361 AE20, WNF 7321 AE20, WNF 7341 AE20, and WNF 7301 WE20. Each of these models boasts a range of features designed to enhance the laundry experience and ensure optimal cleaning results.

The WNF 7361 AE20 stands out with its impressive 8 kg load capacity, making it ideal for larger households. It incorporates Blomberg's ProSmart Inverter Motor, known for its quiet operation and energy efficiency. This model features a variety of wash programs, including a quick-wash setting that allows users to clean lightly soiled garments in just 14 minutes. Additionally, the machine's Hygiene+ program is designed to eliminate bacteria and allergens, providing peace of mind for sensitive skin.

Next, the WNF 7321 AE20 offers a slightly more compact 7 kg load capacity, making it a perfect fit for smaller spaces without sacrificing performance. This model also features the ProSmart Inverter Motor, ensuring low energy consumption as well as reduced noise levels. Users will appreciate the DrumClean program, which keeps the washing drum hygienic and odor-free, and the Delay Start option, providing flexibility in scheduling washes at their convenience.

The WNF 7341 AE20 introduces a 9 kg capacity, catering to families with larger laundry demands. Similar to the other models, it includes the ProSmart Inverter Motor for efficient and quiet operations. The EcoGentle function ensures that even delicate fabrics receive gentle care while being cleaned efficiently. This model also features a user-friendly LCD display, making it easy to choose the desired settings and programs.

Lastly, the WNF 7301 WE20 is a versatile model with a load capacity of 7 kg. It combines efficiency with a sleek design, offering multiple washing programs that cater to various fabric types. The AutoDry feature is particularly beneficial, automatically stopping the drying process once the desired moisture level is achieved, preventing fabric damage and energy waste.

All these models are equipped with a robust set of features that reflect Blomberg's commitment to quality, efficiency, and environmental responsibility. With state-of-the-art technologies, including energy-efficient motors and specialized wash programs, they provide unrivaled convenience and performance in laundry care. Each model embodies a blend of functionality and modern design, making them excellent choices for any home.