John Lewis JLTDC12 instruction manual Intensive, Anti-crease, Alarm, Time

Page 13

To deselect the function press the Extra delicate button again. LED above is off.

Intensive

If the laundry is still damp after a standard drying programme, you can increase the drying result by using the Intensive function.

1. Choose the drying programme.

2. Press the Intensive button - the LED above is on.

To deselect the function press the Intensive button again. The LED above is off.

Anti-crease

This function prolongs the anti-crease phase to 90 mins in total. The drum rotates in intervals during this phase. The laundry therefore remains relaxed and free of creases. To activate it:

1.Choose the drying programme.

2.Press the Anti-creasebutton - the LED above is on.

If this additional function is selected, the anti- crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can

be removed at any time during the anti- crease phase.

To deselect the function press the Anti- crease button again. The LED above is off. Press the Anti-creasebutton. A 90 minute anti- crease phase is set. The display now shows the anti-crease icon. If this additional function is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti-crease phase.

Alarm

The appliance is supplied with the Alarm function deactivated.

When activated, the buzzer sounds:

–At the end of the cycle

–When the anti-crease phase starts or ends

–When the cycle is interrupted

To activate it:

1.Choose the drying programme.

2.Press the Alarm button - the LED above is on.

To deselect the function press the Alarm button again. The LED above is off.

Time

Use the Time button to select the programme duration after setting the Time programme. You can select a programme duration from 10 mins to 2 hrs in 10-minute steps.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Condenser dryer with heat pump General safety Important safety informationUse InstallationCause an explosion. Only tumble dry items washed with water Environmental tips Child safetyEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Control panel Programme selector and Off switchBefore first use Time button Display Dry timeProgrammes Programme chartSorting laundry Sorting and preparing laundryPreparing laundry Daily use Switching machine onDoor opening and laundry loading Selecting the programmeBe removed at any time during the anti- crease phase AlarmIntensive Anti-creaseSetting child lock Delay startChanging programme Starting the programmeDrying cycle complete / removing laundry Cleaning fluff filter Maintenance and cleaningOpen door Door until they snap into place Filter into the brackets on the loadingRe-insert fine filter Locks into the interlockWater reservoir has a volume of approx litres Cleaning the door sealEmptying the water reservoir Cleaning heat exchanger filters When doing this, please use rubber gloves Cleaning the drumWhat to do if Clean operating screen and housingAlarm permanent on/off Machine settingsReplacing the drum light Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsTransporting the appliance InstallationAppliance positioning Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveDoor reversal Repairs after sales serviceMod Spare parts Page Page 136912010-00-052010
Top Page Image Contents