John Lewis JLTDC12 Filter into the brackets on the loading, Door until they snap into place

Page 17

4.Push down the unlock button on the large mesh filter.

The large mesh filter pops up.

6.Remove the fluff from fine filter. It is best to use a damp hand for this purpose.

Clean the entire filter area

The filter area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff if necessary.

7.To do this, grip the top of the large mesh filter and pull it forwards until it comes loose from the two brackets.

5.Take out fine filter.

8.Remove fluff from the entire filter area. It is best to use a vacuum cleaner for this purpose.

9.	Press both journals of the large mesh
	filter into the brackets on the loading
	door until they snap into place.
10.	Re-insert fine filter.
11.	Press against the large mesh filter until it
	locks into the interlock.
17

Image 17

Contents Condenser dryer with heat pump General safety Important safety informationCause an explosion. Only tumble dry items washed with water InstallationUse Environmental tips Child safetyEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Control panel Programme selector and Off switchBefore first use Time button Display Dry timeProgrammes Programme chartPreparing laundry Sorting and preparing laundrySorting laundry Daily use Switching machine onDoor opening and laundry loading Selecting the programmeBe removed at any time during the anti- crease phase AlarmIntensive Anti-creaseSetting child lock Delay startDrying cycle complete / removing laundry Starting the programmeChanging programme Open door Maintenance and cleaningCleaning fluff filter Door until they snap into place Filter into the brackets on the loadingRe-insert fine filter Locks into the interlockEmptying the water reservoir Cleaning the door sealWater reservoir has a volume of approx litres Cleaning heat exchanger filters When doing this, please use rubber gloves Cleaning the drumWhat to do if Clean operating screen and housingReplacing the drum light Machine settingsAlarm permanent on/off Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsAppliance positioning InstallationTransporting the appliance Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveMod Repairs after sales serviceDoor reversal Spare parts Page Page 136912010-00-052010