John Lewis JLTDC12 instruction manual Repairs after sales service, Door reversal, Mod

Page 28

Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.

Warning! The power supply cable must be accessible after installing the machine.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum

gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

Door reversal

To make it easier to load or unload the laundry, the door can be reversed.

Warning! The door must only be reversed by an authorised service engineer.

Please contact your nearest John Lewis branch who will give you details of your local Service Force Centre. The engineer will carry out the door reversal at your cost.

Repairs - after sales service

Your appliance comes with a three year warranty. If it is not working correctly; consult the fault finding guides within this instruction book (Something not working). If a fault occurs which you can not resolve through following the advice and information contained within this instruction manual, the next step is to contact our extended warranty administrators on:

0844 871 7771

They will give you details for your local Service engineer. Before calling out an engineer, please ensure you have read the details under the heading “Something not working”.

When you contact your local service engineer you will need to give the following details:

1.Your name, address and post code

2.Your telephone number

3.Clear and concise details of fault

4.The purchase date as found on your receipt

5.The model and serial number of the appliance. So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod.......................................

P.N.C.....................................

S.N.........................................

28

Image 28
Contents Condenser dryer with heat pump Important safety information General safetyUse InstallationCause an explosion. Only tumble dry items washed with water Child safety Environmental tipsEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Programme selector and Off switch Control panelBefore first use Time button Display Dry timeProgramme chart ProgrammesSorting laundry Sorting and preparing laundryPreparing laundry Switching machine on Daily useDoor opening and laundry loading Selecting the programmeAlarm Be removed at any time during the anti- crease phaseIntensive Anti-creaseDelay start Setting child lockChanging programme Starting the programmeDrying cycle complete / removing laundry Cleaning fluff filter Maintenance and cleaningOpen door Filter into the brackets on the loading Door until they snap into placeRe-insert fine filter Locks into the interlockWater reservoir has a volume of approx litres Cleaning the door sealEmptying the water reservoir Cleaning heat exchanger filters Cleaning the drum When doing this, please use rubber glovesClean operating screen and housing What to do ifAlarm permanent on/off Machine settingsReplacing the drum light Adjusting the level of conductivity Press the Start/Pause button until you set desired levelTechnical specifications Consumption values Transporting the appliance Installation Appliance positioning Removing transport safety packaging Electrical connectionGreen and Yellow Earth Blue Neutral Brown Live Green & Yellow Brown Blue Cord ClampDoor reversal Repairs after sales serviceMod Spare parts Page Page 136912010-00-052010