John Lewis JLTDC12 instruction manual Cleaning the drum, When doing this, please use rubber gloves

Page 20

4.Use a damp hand to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the inside of the door, the fluff filter chamber and the rubber seals of fluff. Insert the fluff filter to the base.

5.Insert the fluff filter into the filter housing (it has to audibly lock) and slide it inside the filter chamber. Close the door in plinth. Note: If the fluff filter is not inserted in the filter housing, the filter housing cannot slide into the appliance base.

6.When necessary, approx. once every 6 months, remove the fluff from the heat exchanger using the sponge supplied.

When doing this, please use rubber gloves.

Tip: The fluff can be removed more easily if it is first dampened (e. g. with a laundry dampener) or with help of vacuum cleaner.

Cleaning the drum

Caution! Do not use abrasives or steel wool to clean the drum.

Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer.

Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs.

20

Image 20
Contents Condenser dryer with heat pump Important safety information General safetyCause an explosion. Only tumble dry items washed with water InstallationUse Child safety Environmental tipsEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Programme selector and Off switch Control panelBefore first use Time button Display Dry timeProgramme chart ProgrammesPreparing laundry Sorting and preparing laundrySorting laundry Switching machine on Daily useDoor opening and laundry loading Selecting the programmeAlarm Be removed at any time during the anti- crease phaseIntensive Anti-creaseDelay start Setting child lockDrying cycle complete / removing laundry Starting the programmeChanging programme Open door Maintenance and cleaningCleaning fluff filter Filter into the brackets on the loading Door until they snap into placeRe-insert fine filter Locks into the interlockEmptying the water reservoir Cleaning the door sealWater reservoir has a volume of approx litres Cleaning heat exchanger filters Cleaning the drum When doing this, please use rubber glovesClean operating screen and housing What to do ifReplacing the drum light Machine settingsAlarm permanent on/off Adjusting the level of conductivity Press the Start/Pause button until you set desired levelTechnical specifications Consumption valuesAppliance positioning InstallationTransporting the appliance Removing transport safety packaging Electrical connectionGreen and Yellow Earth Blue Neutral Brown Live Green & Yellow Brown Blue Cord ClampMod Repairs after sales serviceDoor reversal Spare parts Page Page 136912010-00-052010