John Lewis JLTDC12 instruction manual What to do if, Clean operating screen and housing

Page 21

Clean operating screen and housing

Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine.

Use a damp cloth to wipe down the operating screen and housing.

What to do if ...

Problem 1)

Dryer does not work.

Possible cause

Dryer not connected to mains supply.

Loading door opened.

The Start/Pause button not pressed.

Incorrect programme set.

Remedy

Plug in at mains socket. Check fuse in fuse box (domestic installation).

Close loading door

Press the Start/Pause button.

Set suitable programme. 2)

		Fluff filters clogged.

	Unsatisfactor	Heat exchanger clogged.
	Unsatisfactor
	y drying	Max. loading exceeded.
	results.
	results.	Covered ventilation grill.
		Covered ventilation grill.

		Residue inside the drum.

		High water hardness.

Clean fluff filters. 3)

Clean heat exchanger. 3)

Respect max. loading volume.

Uncover ventilation grill in base area.

Clean the drum inside.

Set suitable water hardness4).

Loading door does not close

Err ( Error ) on the LCD.

No drum light

Filters not locked in place.

Attempt to change parameters after start of the programme.

Programme selector in Off position.

Defective light bulb.

Install fine filter and/or snap course filter into place.

Turn the dryer off and on. Set requested parameters.

Turn it to any programme.

Replace light bulb (see next section).

Abnormally elapsing time on LCD

Programme inactive

Time to end is calculated on the basis of: type, volume and dampness of laundry.

Full water reservoir.

Automatic process; this is not a machine fault.

Empty water reservoir3) , press Start/ Pause button.

21

Image 21

Contents Condenser dryer with heat pump General safety Important safety informationInstallation UseCause an explosion. Only tumble dry items washed with water Environmental tips Child safetyEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Control panel Programme selector and Off switchBefore first use Time button Display Dry timeProgrammes Programme chartSorting and preparing laundry Sorting laundryPreparing laundry Daily use Switching machine onDoor opening and laundry loading Selecting the programmeBe removed at any time during the anti- crease phase AlarmIntensive Anti-creaseSetting child lock Delay startStarting the programme Changing programmeDrying cycle complete / removing laundry Maintenance and cleaning Cleaning fluff filterOpen door Door until they snap into place Filter into the brackets on the loadingRe-insert fine filter Locks into the interlock Cleaning the door seal Water reservoir has a volume of approx litres Emptying the water reservoir Cleaning heat exchanger filters When doing this, please use rubber gloves Cleaning the drumWhat to do if Clean operating screen and housingMachine settings Alarm permanent on/offReplacing the drum light Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsInstallation Transporting the applianceAppliance positioning Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveRepairs after sales service Door reversalMod Spare parts Page Page 136912010-00-052010