John Lewis JLTDC12 Control panel, Before first use, Programme selector and Off switch

Page 9

Control panel

1

2

3

4

5

6

7

8

9

10

1Programme selector and Off switch

2Extra delicate button

3Intensive button

4Anti-crease button

5Alarm button

6Time button

7Display ( Dry time )

8Start/Pause button

9Warning lights: Condenser , Filter ,

Full tank

10Delay start button

Before first use

In order to remove any residues which may have been produced during production, wipe the dryer drum with a damp cloth or carry out a brief drying cycle (ca. 30 min.) with damp cloths in the machine.

At the beginning of drying cycle (3-5 min.) there could be a slightly higher sound level. It is because of start of the compressor that is normal for compressor powered appliances such: refrigerators, freezers .

9

Image 9

Contents Condenser dryer with heat pump General safety Important safety informationInstallation UseCause an explosion. Only tumble dry items washed with water Environmental tips Child safetyEnvironmental information Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Control panel Programme selector and Off switchBefore first use Time button Display Dry timeProgrammes Programme chartSorting and preparing laundry Sorting laundryPreparing laundry Daily use Switching machine onDoor opening and laundry loading Selecting the programmeBe removed at any time during the anti- crease phase AlarmIntensive Anti-creaseSetting child lock Delay startStarting the programme Changing programmeDrying cycle complete / removing laundry Maintenance and cleaning Cleaning fluff filterOpen door Door until they snap into place Filter into the brackets on the loadingRe-insert fine filter Locks into the interlockCleaning the door seal Water reservoir has a volume of approx litresEmptying the water reservoir Cleaning heat exchanger filters When doing this, please use rubber gloves Cleaning the drumWhat to do if Clean operating screen and housingMachine settings Alarm permanent on/offReplacing the drum light Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsInstallation Transporting the applianceAppliance positioning Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveRepairs after sales service Door reversalMod Spare parts Page Page 136912010-00-052010