John Lewis JLTDC12 instruction manual Cleaning the door seal, Emptying the water reservoir

Page 18

If the fine filter is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has finished.

Emptying the water reservoir

Empty the water reservoir after every drying cycle.

If the water reservoir is full, an active programme will break off automatically and the warning lamp Full tank lights. In order to continue the programme, the water reservoir must first be emptied.

Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.

1.Take out drawer containing water reservoir completely 1 and pull up the water reservoir's drainage pipe as far as it will go 2 .

2.

1.

2.Pour the condensed water out into a basin or similar receptacle.

3.Slide the outlet connections in and refit the water reservoir.

If the programme has been interrupted as a result of the water reservoir being full: Press the Start/Pause button to continue the drying cycle.

The water reservoir has a volume of approx. 4 litres.

The condensed water can be used as distilled water, e.g. for steam ironing. However it must first be filtered (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

18

Image 18
Contents Condenser dryer with heat pump Important safety information General safetyInstallation UseCause an explosion. Only tumble dry items washed with water Environmental information Child safetyEnvironmental tips Spin the laundry well before dryingPage Contents Machine settings Description of the appliance Before first use Programme selector and Off switchControl panel Time button Display Dry timeProgramme chart ProgrammesSorting and preparing laundry Sorting laundryPreparing laundry Door opening and laundry loading Switching machine onDaily use Selecting the programmeIntensive AlarmBe removed at any time during the anti- crease phase Anti-creaseDelay start Setting child lockStarting the programme Changing programmeDrying cycle complete / removing laundry Maintenance and cleaning Cleaning fluff filterOpen door Re-insert fine filter Filter into the brackets on the loadingDoor until they snap into place Locks into the interlockCleaning the door seal Water reservoir has a volume of approx litresEmptying the water reservoir Cleaning heat exchanger filters Cleaning the drum When doing this, please use rubber glovesClean operating screen and housing What to do ifMachine settings Alarm permanent on/offReplacing the drum light Adjusting the level of conductivity Press the Start/Pause button until you set desired levelTechnical specifications Consumption valuesInstallation Transporting the applianceAppliance positioning Removing transport safety packaging Electrical connectionGreen and Yellow Earth Blue Neutral Brown Live Green & Yellow Brown Blue Cord ClampRepairs after sales service Door reversalMod Spare parts Page Page 136912010-00-052010