Technics SC-DV170 »A The play and record timers, »B The sleep timer, Using the timers together

Convenient functions

A

ÏPLAY/ÏREC

CLOCK/TIMER

—DEMO

B

				SUBTITLE	SETUP
SLEEP	H	SLEEP		TOP MENU	DISPLAY
					DISC
1		2		3
					j/-/--
4		5		6
7		8		9	0
	MENU				RETURN
	EQ		ENTER
	3D AI EQ/
	M.EQ BAND				AV EFFECT
	MARKER				ANGLE
	UPRO LOGIC		TEST	DIGITAL
		CH SELECT		S.WOOFER	SUPER SRND
	VCR(EXT)/		TAPE/	DVD	TUNER/
	VDP(AUX)	DECK 1/2			BAND
	CANCEL		Ú/g	È￿	Û￿
	PLAY MODE
	MIX 2CH
	AUDIO			SLOW/SEARCH
	SHIFT	MUTING		SKIP
	¶￿		VOLUME		µ￿

SLEEP

SLEEP

Using the timers

»A The play and record timers

Checking the timers

Press [CLOCK/TIMER, –DEMO] to select “FPLAY” (or “ FREC”). The timer settings are shown in the following order:

Play timer:

Start time>Finish time>Source>Volume Record timer:

Start time>Finish time>Broadcast station you select

The timers can be checked even if the unit is off.

Playing the unit after the timers are set

The unit can be used after the timers are set, but ensure the unit is off before the set start time.

Turning the timers on and off

The timers come on at the set times if the “FPLAY/FREC” indicator is lit. They can be turned on and off by pressing [FPLAY/FREC] (á pages 42 and 43).

Note

³If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

³If the power is on, the timer will not function. The system must be in the standby mode.

³This system retains the ON/OFF time settings until you make a new setting. If you make a new ON time setting, you must make a new OFF time setting.

»B The sleep timer

Remote control only

This timer turns the unit off after a set time.

Press [SLEEP] to select the time (minutes).

Each time you press the button:

SLEEP 30_--)SLEEP 60_--)SLEEP 90 ^-=SLEEP OFF(=SLEEP 120(_}

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”. “SLEEP” goes out.

To confirm the remaining time

(While the timer is functioning) Press [SLEEP].

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to display the remaining time, then press again to se- lect the required time.

Using the timers together

Any of the timers can be used together, but ensure the unit is off be- fore the start time for the record and play timers.

RQT5471