Samsung BFW36W user manual Troubleshooting, Check These Points if Your WASHER…

PROBLEM

SOLUTION

will not start..

• Make sure the door is firmly closed.

• Make sure your Washer is plugged in.

• Make sure the water source faucets are turned on.

• Make sure to press the Start/Pause Button to start your Washer.

• Make sure the Child Lock is not activated; see page C4.

• Before your Washer starts to fill, it will make a series of clicking noises

to check the door lock and do a quick drain.

• Check the fuse or reset the circuit breaker

has no water or not enough

• Turn both faucets on fully.

water..

• Make sure the door is tightly closed.

• Straighten the water inlet hoses.

• Disconnect hoses and clean screens. Hose filter screens may be

plugged.

• Open and close the door, then press the Start/Pause Button.

has detergent remains in

• Make sure your Washer is running with sufficient water pressure.

the automatic dispenser

• Make sure the Detergent Selector dial is in the upper position when

after the wash cycle is

using granular detergent.

complete.

vibrates or is too noisy.

• Make sure your Washer is set on a level surface. If the surface is not

level, adjust your Washer feet to level the appliance.

• Make sure that the shipping bolts are removed.

• Make sure your Washer is not touching any other object.

• Make sure the laundry load is balanced.

stops

• Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the door and press the Start/Pause Button to start your

Washer.

For your safety, your Washer will not tumble or spin unless the door is

closed.

• Before your Washer starts to fill, it will make a series of clicking noises

to check the door lock and do a quick drain.

• There may be a pause or soak period in the cycle. Wait briefly and it

may start.

• Check the screens on the inlet hoses at the faucets for obstructions.

Clean the screens periodically.