Samsung BFW36W user manual If the code reappears, call for service, see below

Temperature sensor problem.

Restart the cycle.

If the code reappears, call for service.

High current detected.

Restart the cycle.

If the code reappears, call for service.

High/Low voltage detected.

Restart the cycle.

If the code reappears, call for service.

Vibration sensor problem.

Restart the cycle.

If the code reappears, call for service, see below

Too many suds are detected

To prevent it, cut down on detergents.

during the washing session.

The unit is put on hold until the

suds are reduced. Then, the unit

will go back to the operation.

When it finishes washing, End and

SUdS codes will blink in turn.

For any codes not listed above, call 1-800-360-2742