Samsung BFW36W user manual Information Codes, Press the Power button to turn off your Washer

CODE SYMBOL

MEANING

SOLUTION

Unbalanced load prevented your

Redistribute the load, press the Start/Pause

Washer from spinning.

Button.

Door is unlocked when Washer is

Press the Power button to turn off your Washer,

running.

then restart the cycle. If the code reappears, call

for service.

Door is open when Washer is

Close the door tightly and restart the cycle.

running.

If the code reappears, call for service.

Your Washer failed to lock the

Close the door tightly and restart the cycle.

door.

If the code reappears, call for service.

Water temperature control

Call for service.

problem.

(Heater Control problem)

Your Washer has tried to fill but

Call for service.

has not reached the proper water

level.

The door will not unlock.

Make sure the door is firmly closed.

Push the Power button to turn off your Washer,

then turn it on again. If the code reappears, call

for service.

Motor not running properly.

Restart the cycle pressing the Start/Pause

Button. If the code reappears, call for service.

Your washer is not draining.

Before calling for service, check the following.

It can also mean that the unit

1) Turn off the unit and turn it on again.

senses a small clog while draining.

2) Select only the Spin Cycle.

3) Press the Start/Pause to drain the water.

If it still does not drain, call for service.

Your Washer has tried to fill but

Make sure the water faucets are open all the

was unsuccessful.

way. Check for kinked hoses.

Check the inlet screens on the fill hoses.

Problem with control.

Call for service.

Electric service was lost when

Restart the cycle by pressing the Start/Pause

Washer was running.

Button.

A fault is detected in the water

Call for service

level sensor.

Jammed Key.

Call for service

Motor speed sensor problem.

Restart the cycle.

If the code reappears, call for service.