Quick Start Guide

NOTE: The panel shown above may be different from that of your model.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to using your washer. Please refer to specific sections of this manual for more detailed information.

OPERATING CONTROLS

POWER/CANCEL - Press POWER/CANCEL to turn the washer on or off.

Start - Press START/PAUSE to start your washer after a cycle has been selected. Be sure all desired Modifiers and Options have been selected. The lid must be closed for the washer

to start.

START/PAUSE - Press START/PAUSE to start your washer after a cycle has been selected. Be sure all desired Modifiers and Options have been selected. Press START/PAUSE once to unlock the lid and add a garment. Press START/PAUSE to complete the cycle from where it was stopped. The lid must be closed for the washer to start. Press POWER/CANCEL to stop the wash cycle. The washer will then drain and turn off.

Lid Lock - When the Lid Lock status light glows, the washer lid is locked. The lid must be closed for the washer to Start. NOTE: You must wait until the Lid Lock Light turns off before the lid can be opened.

OPTIONS AND MODIFIERS

You can change Options and Modifiers anytime before Start/Pause is pressed.

Press POWER/CANCEL. Select Wash Cycle.

Select desired OPTIONS and MODIFIERS.

Press START/PAUSE or select DELAY START (on some models) to start wash at a later time.

Changing cycles after pressing Start:

Press POWER/CANCEL once to cancel the cycle. The washer will drain

Select desired Wash Cycle.

Select desired OPTIONS and MODIFIERS.

Press START/PAUSE or select DELAY START (on some models) to start wash at a later time. Washer restarts at the beginning of the new cycle.

NOTE: An error tone will sound if your selection is unavailable.

DETERGENT USE

Use only High Efficiency (HE) detergents.

Using regular detergent will likely result in wash errors, longer cycle times, and

reduced rinsing performance.

For more information, see “Using the Proper Detergent.”

ADD A GARMENT, PAUSING, OR

RESTARTING THE WASHER

You can place additional clothing in the wash

when the “Add a Garment” status light is glowing without sacrificing wash performance, at which time, you can:

Press START/PAUSE once. (Lid Lock light turns off, then open the lid.)

Add garments. (Close washer lid.) Press START/PAUSE to restart.

To unlock the lid after the Add a garment period, Press START/PAUSE once. Pressing POWER/CANCEL will cancel the wash cycle.

STOPPING THE WASHER

You can stop the wash cycle and drain the tub by pressing the Power/Cancel button once.