Samsung DV209AG, DV209AE Digital Graphic, Display, Dry Level, Selection Button, Temp Selection

		The display window shows the estimated time remaining in the cycle after the
		Start/Pause button is pressed. The estimated time remaining may fluctuate as
		the cycle progresses.
		The Drying light will illuminate and remain lit until the cycle is complete.
	Digital Graphic	When your dryer is in the cool-down phase, the Cooling light will illuminate.
2		When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display
		illuminate.
		When the cycle is complete, “END” will appear in the display panel until the
		dryer door is opened or the Power key is pushed.
		If your dryer is paused during a cycle, the indicator lights will blink until the
		Start/Pause button is pressed.
		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
	Dry Level	dryness level. Press the button repeatedly to scroll through the settings.
3		Larger or bulkier loads may require the More Dry setting for complete
	Selection Button
		dryness. The Less Dry setting is best suited for lightweight fabrics or for
		leaving some moisture in the clothing at the end of the cycle. Use for items
		that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An
		indicator light will illuminate next to the desired temperature. Press the button
		repeatedly to scroll through the settings.
4	Temp Selection	High – For sturdy cottons or those labeled Tumble Dry.
		Medium – For permanent press, synthetics, lightweight cottons, or items
	Button
		labeled Tumble Dry Medium.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		When using Manual Dry cycles, time can be adjusted by pressing the Time
5	Time Selection	Selection button.
	Button	During the Sensory Dry cycle, the time light indicator is off because exact

drying times are determined by fluctuating humidity levels.

When the cycle is complete, a chime will sound.

	Signal Selection	When the Wrinkle Prevent option is selected, the chime will sound
6		intermittently.
	Button
		Adjust the volume of the chime or turn it off by pressing the Signal button.

Press the button repeatedly to scroll through the choices.

		Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling
		in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle
7	Wrinkle Prevent	Prevent button to activate this feature.
	Selection Button	The indicator light above the pad will illuminate when Wrinkle Prevent is
		selected. The load is dry, and can be removed at any time during the Wrinkle
		Prevent cycle.
		Time can be added or subtracted from the automatically set times in the
8	Adjust Time	Manual Dry cycles (Time Dry, Wrinkle Release, or Air Fluff cycles).
		To add or subtract time from the cycle, press the Adjust Time arrow pad up
		or down until the desired time is displayed.
9	Start/Pause	Press to pause and restart programs.
	selection button
		Press once to turn your dryer on, press again to turn it off. If your dryer is left
10	Power button	on for more than 10 minutes without any buttons being touched, the power
		automatically turns off.

operating Instructions, tips _21

02 operating Instructions, tips

DV218AEW-02568A-02_EN.indd 21

2009-01-09 ¿ÀÀü 11:43:37