Site Preparation
Figure 6 Typical condenser footprint—dimensions
1”
(25.4mm)
(44.5mm)
|
|
|
|
|
| ||
|
|
|
| ||||
(44.5mm) |
| (108mm) | |||||
2”
(50.8mm)
9/16" (14mm) Typical Diameter
2”
(50.8mm)
Figure 7 Piping connection locations for 1-, 2-, 3- and 4-fan VFD Control and Fan Speed Condensers
Entering 
Hot Gas Line
Leaving
Liquid Line
Fasten liquid and hot gas lines 
to leg using flat surface clamps 
with isolators
Support field piping separately to avoid coil damage and loss of charge.
Traps to extend above coil base by a minimum of
Inverted Traps
Metal clamp
See | Isolator |
Detail | |
Detail | |
| |
| DPN000665 |
| Rev. 02 |
8