Maytag W10150660A manual Installation Clearances, Mobile home Additional installation requirements

Page 6

Installation Clearances

The location must be large enough to allow the dryer door to open fully.

Additional spacing is required if you exhaust out the rear of the dryer to either the right or left side.

Dryer Dimensions

43½"

(110.5 cm)

 

22¼"

*29¼"

(56.5 cm)

 

 

 

 

14" max.*

48 in. 2 *

 

 

 

 

(35.6cm)

18"*

 

 

 

 

 

(310 cm2 )

 

 

 

 

 

 

(45.7 cm)

 

 

 

 

 

 

 

 

 

 

 

 

24 in.2 *

 

 

 

 

 

 

(155 cm2 )

1"

29"

1"

1"*

29¼"

5"

 

(2.5 cm)

(73.7 cm)

(2.5 cm)

(2.5 cm) (74.3 cm) (12.7 cm)

 

A

 

 

B

 

 

3"* (7.6 cm)

3"* (7.6 cm)

C

(74.3 cm)

29"

(73.7 cm)

*Most installations require a minimum 5" (12.7 cm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.”

Installation spacing for recessed area or closet installation

The following spacing dimensions are recommended for this dryer. This dryer has been tested for spacing of 0" (0 cm) clearance on the sides and rear. Recommended spacing should be considered for the following reasons:

Additional spacing should be considered for ease of installation and servicing.

Additional clearances might be required for wall, door and floor moldings.

Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

Companion appliance spacing should also be considered.

A. Recessed area

B. Side view - closet or confined area

C. Closet door with vents

*Required spacing

Mobile home - Additional installation requirements

This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240 MH.

Mobile home installations require:

Metal exhaust system hardware, which is available for purchase from your dealer.

Mobile home Installation Kit Part Number 346764. See “Tools and Parts” section for information on ordering.

Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening.

6

Image 6
Contents Sécheuse À GAZ Bravostm Avec Système DE Soin DES Tissus W10150660ATable of Contents Table DES MatièresDryer Safety Your safety and the safety of others are very importantImportant Safety Instructions Installation Instructions Tools and PartsLocation Requirements Mobile home installations require Installation ClearancesMobile home Additional installation requirements Dryer DimensionsGas Type Electrical RequirementsGas Supply Requirements Gas Supply LineBurner Input Requirements Venting RequirementsGas supply connection requirements Dryer Gas PipeIf using an existing vent system If this is a new vent system Vent materialSpecial provisions for mobile home installations Plan Vent SystemVent system chart Install Vent SystemInstall Leveling Legs Determine vent pathMake Gas Connection Connect VentLevel Dryer Reverse Door Swing Remove the door assemblyReinstall the door Reverse the strikeInstall these screws first Complete Installation If the dryer will not start, check the followingDryer USE Starting Your DryerTo stop or pause your dryer at any time Stopping, Pausing or RestartingDrying and Cycle Tips To restart the dryerStatus Lights CyclesModifiers End of Cycle Signal OptionsChanging Cycles, Modifiers and Options To use the drying rack Rack Dry Setting Temp Time Wool SweatersDrying Rack Option Stuffed toys or pillowsCleaning the Dryer Interior Cleaning the Dryer LocationCleaning the Lint Screen Dryer CareRemoving Accumulated Lint Vacation and Moving CareChanging the Drum Light Troubleshooting Dryer OperationDryer Results Stains on load or drum Cycle time too shortLint on load Loads are wrinkledU.S.A Assistance or ServiceAccessories CanadaMaytag Corporation Major Appliance Warranty ONE Year Limited WarrantyPage Sécurité DE LA Sécheuse Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Instructions D’INSTALLATION Exigences d’emplacementOutillage et pièces Dimensions de la sécheuse Linstallation dans une maison mobile exigeDégagements de séparation à respecter Type de gaz Spécifications électriquesAlimentation en gaz Gaz naturelCaractéristiques d’alimentation du brûleur Canalisation d’arrivée de gazExigences concernant le raccordement au gaz Canalisation d’arrivée de gaz de la sécheuseExigences concernant lévacuation En cas dutilisation du système dévacuation existantPlanification du système d’évacuation ÉvacuationAutres installations où le dégagement est réduit Déterminer litinéraire dacheminement du conduitTableau des systèmes dévacuation Raccordement au gaz Installation du système d’évacuationInstallation des pieds de nivellement Pour utilisation dans une maison mobileRaccordement du conduit d’évacuation Réglage de laplomb de la sécheuseInversion du sens douverture de la porte Dépose de la porteInversion de la gâche Réinstallation de la porte Achever l’installation Si la sécheuse ne démarre pas, vérifier ce qui suitUtilisation DE LA Sécheuse Mise en marche de la sécheuseArrêt, pause ou remise en marche Pour mettre la sécheuse en pause ou larrêter à tout momentPour remettre la sécheuse en marche Conseils pour le séchage et les programmes Témoins lumineuxProgrammes Modificateurs Signal de fin de programme Option de grille de séchage Modification des préréglages de niveau de séchageUtilisation de la grille de séchage Nettoyage de lemplacement de la sécheuse Entretien DE LA SécheuseNettoyage du filtre à charpie Déménagement Nettoyage de l’intérieur de la sécheuseRetrait de la charpie accumulée Changement de l’ampoule d’éclairage du tambourDépannage Fonctionnement de la sécheuseRésultats de la sécheuse Taches sur la charge ou sur le tambour Temps de programme trop courtCharpie sur la charge Charges avec faux plisAu Canada Assistance OU ServiceAccessoires Si vous avez besoin de pièces de rechangeGarantie DES Gros Appareils Ménagers Maytag Corporation W10150660A SP PN W10150661A

W10150661A, W10150660A specifications

The Maytag W10150660A and W10150661A are two exceptional models designed to enhance the user experience in home laundry. They showcase advanced features and sophisticated technologies that cater to the evolving needs of modern households.

One of the standout characteristics of both models is their robust build quality, reflecting Maytag's commitment to durability and reliability. Made from high-grade materials, these units offer a long lifespan, ensuring they can handle even the toughest laundry loads. This is especially important for larger families or those who regularly do extensive laundry.

The W10150660A and W10150661A feature innovative washing options that allow users to customize their laundry experience. With multiple wash cycles, including options for heavy-duty, delicate, and quick washes, the models can adeptly manage any type of fabric, providing the right care for every garment. This versatility makes them ideal for households with diverse laundry needs.

Energy efficiency is another hallmark of these Maytag models. They come equipped with advanced technologies designed to minimize water and energy consumption without compromising cleaning performance. This not only helps in reducing utility bills but also aligns with environmentally friendly practices, making them a responsible choice for eco-conscious consumers.

Both the W10150660A and W10150661A utilize a powerful agitator system that ensures thorough cleaning by effectively removing dirt and stains from fabrics. The robust motor delivers optimal torque, allowing the units to tackle even the most stubborn grime with ease.

Additionally, these models are designed with user convenience in mind. The intuitive control panels are straightforward and easy to navigate, enabling users to select their desired settings with minimal effort. Features such as time delay options and automatic dispensers further streamline the laundry process, offering additional flexibility to accommodate busy lifestyles.

The spacious drum capacity provided in both models allows for handling larger loads, reducing the number of cycles needed for laundry. This not only saves time but also makes laundry days more efficient.

In summary, the Maytag W10150660A and W10150661A combine durability, versatility, energy efficiency, and user-friendly features. These models stand out as reliable allies in tackling laundry challenges, making them an excellent addition to any modern home.