Humminbird HDR 650 manual Power On/Off, Key Functions Overview

Page 35

Power On/Off

The power is controlled by the power source connected to the HDR 650. When the power source is turned on, the HDR 650 is powered on. When the power source is turned off, the HDR 650 is powered off.

Key Functions Overview

1.Select a Function: Press the MENU key repeatedly until you reach the appropriate menu.

2.Adjust the Setting: Press the UP or DOWN arrow key to adjust the setting. Press + Hold either key to scroll through the range of settings quickly.

3.Save: After your selection is made, wait 5 seconds for the unit to return to normal operation. Your settings are saved automatically even after the unit is powered off.

31	Operations

Image 35

Contents HDR 650 Installation Operations Manual Thank You Table of Contents Maintenance How Sonar Works Installation Overview Installing the HDR Cutting the Mounting Hole Locating the HDR 650 Mounting PositionHDR Face Plate Trim Ring Tabs Customizing and Assembling the HDRHDR 650 Control Head Installing the HDRCollar Gasket DashboardView Buzzer Installing the BuzzerConnecting to the Power Supply Inline Fuse Holder Installing the TransducerTransducer Installation Overview StepRib Transom Transducer InstallationLocating the Transducer Mounting Position Rivets Strakes TransomHullDeadrise Angle LevelPreparing the Mounting Location Drill Holes Assembling the Transducer and Initial Mounting4th hole Mark Initial Bead Alignment Number Transom Angle Measured Distance Transom Angle in degrees MeasuredWeight DistanceBead Ratchet Knuckle Beads RatchetRib Snap the pivot arm down into place Trailingedge One click too low Leading edge One click too highRouting the Cable Transom Mount Transducer Installation See the illustration Storing Excess Cable Connecting the CableTest and Finish the Installation Storing Excess Cable Gathered at one location as shownLevel Seam aligned with boat hull Rib Ratchet BeadTransom Mount Transducer Installation Locking Down the Transducer Optional Inside the Hull Transducer Installation Positioning the Transducer and Preferred Mounting Area Trial InstallationRouting the Cable Make sure the position of the transducer is marked Permanently Mounting the TransducerTrolling Motor Transducer Options Trolling Motor Transducer InstallationDepth Units Shallow Alarm Icon IndicatesOperating the HDR HDR 650 Control HeadKey Functions Overview Power On/OffSet Units UnitsSet Shallow Alarm Icon Shallow AlarmSet Deep Alarm Icon Deep AlarmPostiveOffset NumberIcon NegativeOffset NumberIconTransducer Maintenance MaintenanceHDR 650 Maintenance HDR 650 Doesnt Power Up TroubleshootingBottom Reading Disappears During a Hard Turn No Bottom Reading on the DisplayNo Continuous Depth Display in Very Shallow Water Screen Fades, Images are not SharpYear Limited Warranty Humminbird Service Policy Returning Your Unit for Service Specifications Specifications Contact Humminbird