Radio Shack HTX-10 owner manual Quick Look AT the Controls

Page 16
MODE/T-LOW/5
RF-G/MIC-G

A QUICK LOOK AT THE CONTROLS

OFF/VOLUME — turns the radio on/off; adjusts the volume

— attenuates strong signals; reduces the micro- phone’s gain and SSB transmitting power

STEP/NB/1 — selects the frequency tuning step; turns the noise blanker on/off; selects memory Channel 1

CALL/2 — quickly recalls a frequency in memory Channel 2; se- lects memory Channel 2

SCAN/SHIFT/3 — starts/stops scanning; selects the frequency shift; selects memory Channel 3

LCR/4 — recalls the last tuned channel; selects memory Channel 4

— selects the operation band, AM/FM/USB/LSB; turns hi-cut filter on/off; selects memory Channel 5

M-LOAD/M-SAVE— loads from/saves to a memory location

FINE/PUSH FUNC — adjusts fine tuning; activates second function

SQUELCH — sets the squelch level to block weak signals

TUNE — selects a frequency

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HTX-10 Features Page Manual Conventions FCC InformationContents Introduction to Amateur Radio Page Attaching the Microphone Holder PreparationMounting the Transceiver Page Connecting AN Antenna Page Connecting the Microphone Connecting AN Optional External SpeakerUsing Vehicle Battery Power Frame chassis groundUsing the Transceiver AS a Base Station Page Quick Look AT the Controls Setting Squelch and Receiving OperationTransmitting Page Special Features Using the Special FeaturesUsing Step Using Call Using ScanUsing M-LOAD Using LCR Last Channel RecallUsing NB Noise Blanker Using Shift Using T-LOW Tone-LowUsing M-SAVE Memory Save Using Fine ClarifierUsing MIC-G Microphone Gain Using RF-G RF GainTurning the KEY Tone on and OFF Care and Maintenance Troubleshooting Problem Possible Causes RemediesNoise Reduction Replacing the Fuse Page Specifications GeneralTransmitter Page Page RadioShack Division of Tandy Corporation Fort Worth, Texas
Top Page Image Contents