Radio Shack HTX-10 owner manual Using Step

Page 21

Feature	See:


RF-G (RF Gain) — attenuates strong	Page 26
signals.

MIC-G (Microphone Gain) —	Page 26
reduces the microphone gain and
SSB transmitting power,

Using STEP

Repeatedly press STEP to select the frequency step your trans- ceiver displays when it shows a frequency. As you press STEP, one of the three frequency digits flashes for about 2 seconds to show which digit is selected. The increment that the selected digit displays is:

•the rightmost digit: 1 kHz

•the second digit from the right: 10 kHz

•the third digit from the right: 100 kHz

21

Image 21

Contents HTX-10 Features Page FCC Information Manual ConventionsContents Introduction to Amateur Radio Page Preparation Attaching the Microphone HolderMounting the Transceiver Page Connecting AN Antenna Page Connecting AN Optional External Speaker Connecting the MicrophoneFrame chassis ground Using Vehicle Battery PowerUsing the Transceiver AS a Base Station Page Quick Look AT the Controls Operation Setting Squelch and Receiving Transmitting Page Using the Special Features Special FeaturesUsing Step Using Scan Using CallUsing LCR Last Channel Recall Using M-LOADUsing NB Noise Blanker Using T-LOW Tone-Low Using ShiftUsing Fine Clarifier Using M-SAVE Memory SaveUsing RF-G RF Gain Using MIC-G Microphone GainTurning the KEY Tone on and OFF Care and Maintenance Problem Possible Causes Remedies TroubleshootingNoise Reduction Replacing the Fuse Page General SpecificationsTransmitter Page Page RadioShack Division of Tandy Corporation Fort Worth, Texas