Radio Shack HTX-10 owner manual Using Call, Using Scan

Using CALL

The transceiver’s call memory lets you quickly recall a specific frequency in memory Channel 2.

Note: See “Using M-SAVE (Memory Save)” on Page 25 for more information about storing a frequency in memory channel 2.

Press CALL to recall the stored frequency at any time. The fre- quency flashes.

Press CALL again and the last selected frequency appears.

Using SCAN

Press SCAN to scan incoming signals. SCAN appears and the transceiver stops for 5 seconds on each channel when it detects a signal.

To stop scanning, press SCAN or the PTT button on the micro- phone. SCAN disappears.

22